HLMP-D150, HLMP-D155, HLMP-K150 and HLMP-K155
T-13/4 (5 mm), T-1 (3 mm), Low Current,
Double Heterojunction AlGaAs Red LED Lamps
Data Sheet
Description
Features
These solid state LED lamps utilize double heterojunction
(DH) AlGaAs/GaAs material technology. This LED material
has outstanding light output efficiency at very low drive
currents. The color is deep red at the dominant wavelength of 637 nanometres. These lamps are ideally suited
for use in applications where high light output is required
with minimum power output.
• Minimum luminous intensity specified at 1 mA
Applications
• TTL compatible
• Low power circuits
• Deep red color
• High light output at low currents
• Wide viewing angle
• Outstanding material efficiency
• Low power/low forward voltage
• CMOS/MOS compatible
• Battery powered equipment
• Telecommunication indicators
Package Dimensions
5.08 (0.200)
4.57 (0.180)
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
25.40 (1.00)
MINIMUM
3.17 (.125)
2.67 (.105)
3.43 (.135)
2.92 (.115)
0.89 (0.035) 9.19 (0.362)
0.64 (0.025) 8.43 (0.332)
13.25 (0.522)
12.45 (0.490)
4.70 (.185)
4.19 (.165)
1.14 (.045)
0.51 (.020)
6.35 (.250)
5.58 (.220)
1.32 (0.052)
1.02 (0.040)
0.65 (0.026) MAX.
CATHODE
Ø
5.08 (0.200)
4.57 (0.180)
0.65 (0.026) max.
23.0 MIN.
(0.90)
0.46 (0.018)
SQUARE NOMINAL
24.1(.95) min.
1.52 (.060)
1.02 (.040)
0.55 (0.022)
0.40 (0.016)
1.27(0.050)
NOM.
SQ. TYP.
6.10 (0.240)
5.59 (0.220)
1.27 (0.050)
NOM.
6.1 (0.240)
5.6 (0.220)
CATHODE
2.54 (0.100)
NOM.
2.54 (0.100) NOM.
A.
Notes:
1. All dimensions are in mm (inches).
2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.
3. For PCB hole recommendations, see the Precautions section.
(0.022) 0.55 SQ. TYP.
(0.016) 0.40
2.79 (.110)
2.29 (.090)
B.
C.
