TANTALUM CAPACITORS
E/SV Series Tantalum Chip Capacitors
PERFORMANCE CHARACTERISTICS
DIMENSIONS [mm]
L
Y
W1
L
W1
H
H
H
W1
L
Operating temperature range
−55 to +125°C with proper voltage
derating as shown in the following table.
DC working voltage and surge voltage
Z
B2
only
Z
W2
W2
W2
Rated voltage
Z
[J, P, A2, A cases]
Z
Z
Working
Z
Surge
[B3, B2 cases]
[C, D cases]
(Unit: mm)
Case
EIA code
Code
L
W1
W2
H
Z
Y
J
–
1.6 ± 0.1 0.8 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 0.3 ± 0.15
P
2012
2.0 ± 0.1 1.25 ± 0.2 0.9 ± 0.2 1.1 ± 0.1 0.5 ± 0.1
A2 (U)
3216L
3.2 ± 0.2 1.6 ± 0.2 1.2 ± 0.1 1.1 ± 0.1 0.8 ± 0.2
A
3216H
3.2 ± 0.2 1.6 ± 0.2 1.2 ± 0.1 1.6 ± 0.2 0.8 ± 0.2
B3 (W)
–
3.5 ± 0.2 2.8 ± 0.2 2.2 ± 0.1 1.1 ± 0.1 0.8 ± 0.2
B2 (S )
3528
3.5 ± 0.2 2.8 ± 0.2 2.3 ± 0.1 1.9 ± 0.2 0.8 ± 0.2
C
6032
6.0 ± 0.2 3.2 ± 0.2 2.2 ± 0.1 2.5 ± 0.2 1.3 ± 0.2
0.4 C
D
7343
7.3 ± 0.2 4.3 ± 0.2 2.4 ± 0.1 2.8 ± 0.2 1.3 ± 0.2
0.5 C
(STANDARD C-V VALUE REFERENCE BY CASE CODE)
DC Rated
Voltage
(Vdc)
16
20
25
35
0.47
P
A2
A
A
0.68
P
A2
A
A
A
A
µF
2.5
4
6.3
1.0
P
3.3
P
4.7
J
J
15
J, P
P
P
33
P
47
A
68
A2
J, P
A2, A
A
J
P, A2
A
A
A
A, B2
A, B3
B2
J, P, A P, A2, A
6.8
100
A2
A
P
2.2
22
J, P
J, P
J
1.5
10
10
A
P, A2
A
P, A2, A A2, A, B2 A, B3, B2
A2, A
B3
B2
P, A2, A A, B3, B2 A, B3, B2 B2, C
A
A, B3
B2
A, B3 A, B3, B2, C B2, C
B3
B2
B3, B2 B3, B2 B2, C
B2
A
A
B2
B2
B2
C
C
C, D
C
D
D
C
D
C, D
D
150
B2
B2
C
D
220
B2
C
C, D
D
330
C
C
D
470
C, D
D
D
680
D
D
D
C, D
C
C
D
at 85°C
2.5 4 6.3 10 16 20 25 35 V
2.5 4 6.3 10 16 20 25 35 V
at 125°C 1.6 2.5 4 6.3 10 13 16 22 V
at 85°C
3.3 5.2 8 13 20 26 33 46 V
Capacitance (at 20°C, 120 Hz)
Range:
0.47 µF to 680 µF
Tolerance:
± 20%, (±10%)
Capacitance change with temperature
Not to exceed −12% at −55°C, +12% at
85°C, and +15% at 125°C
Tangent of loss angle (at 20°C, 120 Hz)
(Standard)
0.047 µF to 4.7 µF: less than 0.04
6.8 µF to 68 µF: less than 0.06
(Extended) (1)
2.5 Vdc to 10 Vdc: less than 0.08
16 Vdc to 35 Vdc: less than 0.06
DC leakage current (at 20°C)
0.01 C•V (2) µA or 0.5 µA, whichever is greater
Damp heat (90 to 95% RH at 40°C, 56 days (1344 h))
Capacitance change: ±5% (±12%) (3)
Tangent of loss angle: 150% of initial
requirements
DC leakage current:
initial requirements
Endurance (at 85°C, DC rated voltage, 2000 h)
Capacitance change: ±10% (±12%) (3)
Tangent of loss angle: initial requirements
DC leakage current:
125% of
initial requirements
Resistance to soldering heat
(solder reflow at 260°C, 10 s.
or solder dip at 260°C, 5 s.)
Capacitance change: +5% (+12%) (3)
Leakage current:
initial requirements
Tangent of loss angle: initial requirements
NEC obtained IEC Qualification Approval on R
Series Standard Ratings in September 1987.
1. Refer to standard ratings for tangent of loss angle of the following items:
4 V/22 µF, 6.3 V/15 µF products in A2 case.
2.5 V/47 µF, 68 µF, 4 V/33 µF, 47 µF, 6.3 V/22 µF, 33 µF, 47 µF,
10 V/22 µF, 16 V/10 µ F products in A case.
2.5 V/100 µF, 4 V/47 µF, 68 µF, 100 µF, 6.3 V/22 µF, 33 µF, 47 µF,
10V/15 µF, 22 µF, 16 V/10 µF products in B3 case.
2.5 V/150 µF, 220 µF, 4 V/100 µF, 150 µF, 6.3 V/68 µF, 100 µF
products in B2 case.
2.5 V/470 µF, 4 V/470 µF, 680 µF, 6.3 V/220 µF, 330 µF, 470 µF,
10 V/150 µF, 220 µF, 16V/100 µF products in D case.
2. Product of capacitance in µF and voltage in V.
3. Capacitance change of ± 12% applies to
4 V/22 µF, 6.3 V/6.8 µF to 15 µF, 10 V/3.3 µF to 10 µF, 16 V/2.2
µF products in A2 case;
2.5 V/47 µF, 68 µF, 4 V/22 µF to 47 µF, 6.3 V/10 µF to 47 µF, 10
V/4.7 µF to 22 µF, 16 V/3.3 µF to 6.8 µF, 20 V/2.2 µF to 4.7 µF,
25 V/2.2 µF, 35 V/1 µF, 1.5 µF products in A case;
2.5 V/100 µF to 150 µF, 4 V/100 µF, 6.3 V/68 µF, 100 µF products in B2 case;
2.5 V/470 µF, 4 V/220 µF to 330 µF, 6.3 V/100 µF, 10 V/68 µF, 16
V/47 µF products in C case;
2.5 V/470 µF, 4 V/470 µF, 680 µF, 6.3 V/220 µF, 330 µF, 470 µF,
10 V/150 µF, 220 µF,16 V/100 µF products in D case.
Capacitance change of ±15% applies to all products with the
B3 case.
See pages 25 and 26 for taping specifications.
EC0171EJUV0SG00
5