HCNR200 and HCNR201
High-Linearity Analog Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The HCNR200/201 high-linearity analog optocoupler
consists of a high-performance AlGaAs LED that illumi‑
nates two closely matched photodiodes. The input pho‑
todiode can be used to monitor, and therefore stabilize,
the light output of the LED. As a result, the non-linearity
and drift characteristics of the LED can be virtually elimi‑
nated. The output photodiode produces a photocur ent
r
that is linearly related to the light output of the LED. The
close matching of the photo-diodes and advanced de‑
sign of the package ensure the high linearity and stable
gain characteristics of the opto oupler.
c
• Low nonlinearity: 0.01%
• K3 (IPD2/IPD1) transfer gain
HCNR200: ±15%
HCNR201: ±5%
• Low gain temperature coefficient: ‑65 ppm/°C
• Wide bandwidth – DC to >1 MHz
• Worldwide safety approval
– UL 1577 recognized (5 kV rms/1 min rating)
– CSA approved
– IEC/EN/DIN EN 60747-5-2 approved
VIORM = 1414 V peak (option #050)
• Surface mount option available (Option #300)
• 8-Pin DIP package - 0.400” spacing
• Allows flexible circuit design
The HCNR200/201 can be used to isolate analog signals
in a wide variety of applications that require good stabil‑
ity, linearity, bandwidth and low cost. The HCNR200/201
is very flexible and, by appro riate design of the appli‑
p
cation circuit, is capable of operating in many different
modes, includng: unipolar/bipolar, ac/dc and inverting/
i
non-inverting. The HCNR200/201 is an excellent solution
for many analog isola ion problems.
t
Schematic
LED CATHODE
1
8
-
NC
VF
LED ANODE
PD1 CATHODE
PD1 ANODE
+
IF
2
7
3
6
IPD1
4
I PD2
5
NC
Applications
• Low cost analog isolation
• Telecom: Modem, PBX
• Industrial process control:
Transducer isolator
Isolator for thermo ouples 4 mA to 20 mA loop isola‑
c
tion
• SMPS feedback loop, SMPS feedforward
• Monitor motor supply voltage
• Medical
PD2 CATHODE
PD2 ANODE
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.