IL-Z SERIES CONNECTORS
1.25mm (.049") Contact Spacing, PCB-to-Cable (Crimp Type) Connectors
• • • • • • • • • • • • • •
IL-Z Series connectors are designed for board-to-cable applications. High-density 1.25mm (.049") contact spacing (single row),
5.2mm (.205") high when mated vertically. Low-profile design
includes board-mounted pin headers (straight and right-angle) and
wire-terminated socket housings (with crimp socket contacts).
The IL-Z Series has a wide variety of applications, including
commercial and household appliances, VTR's, television, office
automation equipment and measuring instruments.
GENERAL SPECIFICATIONS
Number of Contacts
2 to 15
Contact Spacing
1.25mm (.049"), single row
Current Rating
1 Amp
Dielectric Withstanding Voltage
500 VAC r.m.s. (for one minute)
FEATURES
Insulation Resistance
100 megohams min.
• Crimp type for efficient wire termination
Contact Resistance
20 milliohms max.
Operating Temperature Range
-40°C to +70°C
• High reliability socket contacts
Applicable PCB Thickness
• High-density packaging and automatic mounting
• SMT and through hole pin headers available
0.6 to 1.2mm (.024 to .047")
Applicable Wire
#32 to #28 AWG (stranded)
MATERIALS AND FINISHES
• Boxed pin header design prevents mismating
Description
Materials/Finishes
Insulator
Pin Contact
Through hole pin header and socket housing:
6-6 Nylon (UL94V-0, Light Brown)
SMT pin header: PPS (UL94V-0, Light Gray)
Brass/Tin plating over Nickel
Socket Contact
Phosphor Bronze/Tin plating
Hold-down
• Anti-wicking feature
Phosphor Bronze/Tin plating (SMT only)
Connector Profile (Ref.)
PIN HEADER (THROUGH HOLE TYPE)
SOCKET HOUSING
IL - Z
ORDERING INFORMATION
PIN HEADER (SMT TYPE)
IL - Z – **
Series
No. of Contacts
2 to 15
Contact Type
P – Pin
Termination
L – Right Angle
Mounting Type
Surface Mount Type
Embossed Tape
1,500 pcs/reel
P
L – SMTY – E1500
**
*
S
125
*
3
*
Series
No. of Contacts
2 to 15
Contact Type
P – Pin
S – Socket
Contact Arrangement
S – Single Row
Pitch
1.25mm (.049")
Termination
T – Straight Through Hole
C – Crimp Contact
L – Right Angle Through Hole
Pin Header
PCB Thickness: 0.6mm (.024") – 1.2mm (.047")
Socket
Applicable Wire: AWG #28, #30, #32
Pin Header
Solder Post Length:
E – 1.7mm (.067")
Dimensions without notice.
Dimensions and specifications subject to change in mm (inches).
61