MC100EPT21
3.3V Differential
LVPECL/LVDS/CML to
LVTTL/LVCMOS Translator
The MC100EPT21 is a Differential LVPECL/LVDS/CML to
LVTTL/LVCMOS translator. Because LVPECL (Positive ECL),
LVDS, and positive CML input levels and LVTTL/LVCMOS output
levels are used, only +3.3 V and ground are required. The small
outline 8−lead SOIC package makes the EPT21 ideal for applications
which require the translation of a clock or data signal.
The VBB output allows this EPT21 to be cap coupled in either
single−ended or differential input mode. When single−ended cap
coupled, VBB output is tied to the D input and D is driven for a
non−inverting buffer, or VBB output is tied to the D input and D is
driven for an inverting buffer. When cap coupled differentially, VBB
output is connected through a resistor to each input pin. If used, the
VBB pin should be bypassed to VCC via a 0.01 mF capacitor. For
additional information see AND8020/D. For a single−ended direct
connection use an external voltage reference source such as a resistor
divider. Do not use VBB for a single−ended direct connection or port to
another device.
http://onsemi.com
MARKING
DIAGRAMS*
8
SO−8
D SUFFIX
CASE 751
8
1
1
KPT21
ALYW
G
8
TSSOP−8
DT SUFFIX
CASE 948R
8
1
1
KA21
ALYWG
G
Features
•
•
•
•
•
•
•
•
1.4 ns Typical Propagation Delay
Maximum Frequency > 275 MHz Typical
DFN8
MN SUFFIX
CASE 506AA
LVPECL/LVDS/CML Inputs, LVTTL/LVCMOS Outputs
1
3RMG
G
24 mA TTL outputs
A
L
Y
W
M
G
Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V
The 100 Series Contains Temperature Compensation
VBB Output
These Devices are Pb−Free and are RoHS Compliant
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
September, 2012 − Rev. 22
1
Publication Order Number:
MC100EPT21/D