DIVISION OF DELTROL CORP.
160
161
SERIES 5 AND 13 AMP
GENERAL PURPOSE
PLUG-IN RELAY
166
FEATURES
MODELS
s
s
s
s
160:
165:
165F:
166F:
166E:
Class F Coil Insulation System for 155°C Total Temperature
Coil Molded in DuPont Rynite® for Environmental Protection
Unique Armature Stop Maintains Adjustment
Fine Wire Gauge Coils are Skeined for Coil Integrity
CONTACT DATA
CONFIGURATION:
Thru 3PDT
MATERIALS:
5 AMP:
1/8" Diameter Moveable Fine Silver
3/16" Diameter Stationary Fine Silver
13 AMP:
3/16" Diameter Moveable Silver Cadmium Oxide
3/16" Diameter Stationary Fine Silver
Gold Flash Standard on All Contacts
Gold Diffused Available on Special Order – Min. Qty. Req’d.
5 Amp Open Frame
161: 13 Amp Open Frame
5 Amp Covered Plug-In 166: 13 Amp Covered Plug-In
5 Amp Flanged Cover w/QC Terminals
13 Amp Flanged Cover w/QC Terminals
Addition of Blowout Magnets – For Higher DC Ratings
Other Suffixes Available
A-Indicator Lamp, B-Push to Test Button
P-Printed Circuit Terminals, TM-Top Mount Cover
NOMINAL
VOLTAGE
AC Coils
Single
Pole Units
CONTACT RATINGS
MODEL
POLE
CONFIGURATION
160/165
thru 3PDT
161/166
thru 3PDT
166E
w/Blowout
Magnet
thru
DPDT
Form X, Y,
W, and Z
MODEL
POLE
CONFIGURATION
165 F, P, TM
thru 3PDT
(
)
166 F, P, TM
thru 3PDT
UL
RATINGS
5 amp or 1/8 HP at 120VAC
5 amp or 1/4 HP at 277VAC
2 amp at 600VAC
5 amp at 28VDC
13 amp or 1/3 HP at 120VAC
13 amp or 1/2 HP at 277VAC*
10 amp at 28VDC
1 HP at 277VAC - 3 phase
3 amp or 3/4 HP at 600 VAC
12 FLA, 35 LRA at 15VAC
3 amp at 150VDC
30,000 cycles
10 amp at 150VDC
100,000 cycles
SEMKO
RATINGS
5 amp at 250VAC 50 Hz AC-1
5 amp at 28VDC DC-1
2.9 amp at 240VAC 50 Hz AC-3
10 amp at 250VAC 50 Hz AC-1
10 amp at 28VDC DC-1
4.9 amp at 240VAC 50 Hz AC-3
Semko marked
upon request
model 165/166 F, P, TM
COIL DATA
AC Coils
2&3
Pole Units
DC Coils
1-3
Pole Units
6VAC
12VAC
24VAC
48VAC
120VAC
240VAC
6VAC
12VAC
24VAC
48VAC
120VAC
240VAC
6VDC
12VDC
24VDC
48VDC
110VDC
RESISTANCE
IN OHMS
± 10%
5.0
20
80
315
2025
8000
4.5
18
72
285
1850
7200
30
120
480
1850
10,000
NOMINAL
COIL
POWER
2.0VA
2.2VA
1.2W
Coil Voltages: USA/Canada
European
AC: Up to 277 Volts/60 Hz AC: Up to 250 Volts 50/60 Hz
DC: Up to 125 Volts
DC: Up to 125 Volts
Coil Treatment: Molded Rynite® Std. Class F
Insulation Resistance: 100 Megohms Minimum
UL Insulation System File No.: E74443
S155D 155°C Total Temperature Std.
(Covers S105 Class A and S130D Class B Requirements)
OPERATE DATA
Pick Up (at 25°C): AC: Volts 85% or Less of Nominal
DC: Volts 75% or Less of Nominal
Operate Time:
Approx. 15 Milliseconds
Release Time:
Approx. 15 Milliseconds
*3 Pole Devices Rated at 6-2/3 Amp When Switching Greater Than
150VAC, Unless Polarity is the Same on All Poles.
ENVIRONMENTAL DATA
UL RECOGNIZED FILE NO.: E37066
CSA CERTIFIED FILE NO.: LR20690
SEMKO CERTIFICATE NO.: 9726189/01-02 Model 165/166 F,P, TM
Operating Ambient: AC: -45° to 55°C DC: -45° to 70°C
Coil Temperature Rise: (25°C Ambient – Continuous Duty)
AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will
Cause Slight Increase in Coil Rise
DC: 25°C Approx.
EXPECTED LIFE
Electrical At Rated Load (Minimum)
100,000 Operations Except as Noted
Mechanical Life
10,000,000 Operations
DIELECTRIC STRENGTH
800 VRMS, 60 Hz Between Contacts
2200 VRMS, 60 Hz Between All Other Elements
10
MECHANICAL DATA
Terminals: All Versions (Except P suffix)
.187" x .020" Quick Connect/Solder
P suffix Version Printed Circuit Pins
Cover:
Clear Polycarbonate – Flammability Rating 94V2
Weight:
Approx. 3 oz. (85 g)