HD-6402
®
Data Sheet
October 31, 2005
CMOS Universal Asynchronous
Receiver Transmitter (UART)
Features
• 8.0MHz Operating Frequency (5962-9052502)
The HD-6402 is a CMOS UART for interfacing computers or
microprocessors to an asynchronous serial data channel.
The receiver converts serial start, data, parity and stop bits.
The transmitter converts parallel data into serial form and
automatically adds start, parity and stop bits. The data word
length can be 5, 6, 7 or 8 bits. Parity may be odd or even.
Parity checking and generation can be inhibited. The stop
bits may be one or two or one and one-half when
transmitting 5-bit code.
The HD-6402 can be used in a wide range of applications
including modems, printers, peripherals and remote data
acquisition systems. Utilizing the Intersil advanced scaled
SAJI IV CMOS process permits operation clock frequencies
up to 8.0MHz (500K Baud). Power requirements, by
comparison, are reduced from 300mW to 10mW. Status
logic increases flexibility and simplifies the user interface.
Pinout
HD-6402 (PDIP, CERDIP)
TOP VIEW
VCC
1
40 TRC
NC
2
39 EPE
GND
3
38 CLS1
RRD
4
37 CLS2
RBR8
5
36 SBS
RBR7
6
35 PI
RBR6
7
34 CRL
RBR5
8
33 TBR8
RBR4
9
10
11
12
13
14
15
16
17
18
19
20
2MHz = 125K
BAUD
8MHz = 500K
BAUD
PKG.
DWG.
#
PDIP
-40 to +85
HD3-6402R-9
E40.6
PDIP*
(Pb-free)
-40 to +85
HD3-6402R-9Z
(Note)
E40.6
CERDIP SMD#
-55 to +125
59629052502MQA
F40.6
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
22 TBRE
RRI
TEMP
PACKAGE RANGE (°C)
23 TBRL
DR
Ordering Information
24 TRE
DRR
• Pb-Free Plus Anneal Available (RoHS Compliant)
25 TRO
RRC
• CMOS/TTL Compatible Inputs
26 TBR1
SFD
• Single +5V Power Supply
27 TBR2
OE
• Compatible with Industry Standard UARTs
28 TBR3
FE
• Automatic Data Formatting and Status Generation
29 TBR4
PE
• Programmable Word Length, Stop Bits and Parity
30 TBR5
RBR1
• Low Power CMOS Design
31 TBR6
RBR2
• 2.0MHz Operating Frequency (HD3-6402R)
32 TBR7
RBR3
FN2956.3
21 MR
1
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.