66179
GULL WING HERMETICALLY SEALED,
SINGLE CHANNEL OPTOCOUPLER
(Electrical Equivalent to 66099)
MICROPAC INDUSTRIES, INC
2/8/2016
Features:
Current transfer ratio: 150% typical
1000 Vdc isolation test voltage
Base lead provided for conventional transistor biasing
Low power consumption
High radiation immunity
Applications:
Military and Space
High Reliability Systems
Voltage Level Shifting
Isolated Receiver Input
Communication Systems
DESCRIPTION
Radiation tests performed on the 66099 optocoupler have shown that the electrical performance of the device after irradiation
is an order of magnitude better than the 4N49 optocouplers. The 66179 has the same components and layout in a 10 pin,
hermetically sealed gull wing package. Figures 1 and 2 from the 66099 Data Sheet illustrate the radiation performance of the
device.
ABSOLUTE MAXIMUM RATINGS (ta =25°C unless otherwise noted)
Input to Output Isolation Voltage (Note 1) ......................................................................................................................... 1 kVdc
Peak Forward Input Current .............................................................................................................................................. 40 mA
Reverse Input Voltage ............................................................................................................................................................ 2 V
Input Power Dissipation (Note 2) ...................................................................................................................................... 80 mW
Continuous Collector Current ............................................................................................................................................. 50 mA
Collector-Emitter Voltage ....................................................................................................................................................... 40 V
Emitter-Base Voltage ............................................................................................................................................................... 4 V
Collector-Base Voltage .......................................................................................................................................................... 40 V
Power Dissipation (Note 3) ............................................................................................................................................. 300 mW
Storage Temperature ........................................................................................................................................................ -65°C to +125°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +100°C
Lead Solder Temperature (5 seconds, 1/16” from case) ................................................................................................... 240°C
Notes:
1. Measured with input diode leads shorted together and output leads shorted together.
2. Derate linearly 1.06 mW/°C above 25°C.
3. Derate linearly 4.0 mW/°C above 25°C.
Package Dimensions
Schematic Diagram
0.435
0.300
0.270
A 2
9 C
0.200
0.270
0.015
0.050
R0.010
7 E
0.035
0.100 MAX
0.010
K 4
8 B
0.005
0.050
.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac Industries reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. 905 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918
www.micropac.com
e-mail: optosales @ micropac.com
REV A Page 1 of 2