DF5A6.8FU
TOSHIBA Diodes for Protecting against ESD Epitaxial Planar Type
DF5A6.8FU
Product for Use Only as Protection against Electrostatic
Discharge (ESD)
Unit: mm
* This product is for protection against electrostatic discharge (ESD) only
and is not intended for any other usage, including without limitation,
the constant voltage diode application.
The mounting of four devices on an ultra-compact package allows the
number of parts and the mounting cost to be reduced.
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Power dissipation
P
200
mW
Junction temperature
Tj
125
°C
Tstg
−55~125
°C
Storage temperature range
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
JEDEC
⎯
temperature, etc.) may cause this product to decrease in the
JEITA
⎯
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute
TOSHIBA
1-2V1B
maximum ratings.
Weight: 0.0062 g (typ.)
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and
estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min
Typ.
Max
Unit
Zener voltage
VZ
IZ = 5 mA
6.4
6.8
7.2
V
Dynamic impedance
ZZ
IZ = 5 mA
―
10
25
Ω
Knee dynamic impedance
ZZK
IZ = 0.5 mA
―
30
―
Ω
Reverse current
IR
VR = 5 V
―
―
0.5
μA
Terminal capacitance
(between Cathode and Anode)
CT
VR = 0, f = 1 MHz
―
45
―
pF
Guaranteed Level of ESD Immunity
Test Condition
ESD Immunity Level
IEC61000-4-2
(Contact discharge)
±30kV
Criterion: No damage to device elements
1
2007-11-01
