FINAL
COM’L: -12/15/20
IND: -14/18/24
Lattice/Vantis
MACH215-12/15/20
High-Density EE CMOS Programmable Logic
DISTINCTIVE CHARACTERISTICS
s
44 Pins
s
38 Inputs with pull-up resistors
s
32 Output Macrocells
s
32 Outputs
s
32 Input Macrocells
s
64 Flip-flops
s
Product terms for:
— Individual flip-flop clock
— Individual asynchronous reset, preset
— Individual output enable
s
For asynchronous and synchronous
applications
s
4 “PAL22RA8” blocks with buried macrocells
s
Pin-compatible with MACH110, MACH111,
MACH210, and MACH211
s
12 ns tPD Commercial
14.5 ns tPD Industrial
s
67 MHz fCNT
GENERAL DESCRIPTION
The MACH215 is a member of the high-performance
EE CMOS MACH device family. This device has
approximately three times the capability of the popular
PAL20RA10 without loss of speed. This device is
designed for use in asynchronous as well as synchronous applications.
The MACH215 consists of four PAL blocks interconnected by a programmable switch matrix. The four PAL
blocks are essentially “PAL22RA8” structures complete
with product-term arrays and programmable macrocells, individual register control product terms, and input
registers. The switch matrix connects the PAL blocks to
each other and to all input pins, providing a high degree
of connectivity between the fully-connected PAL blocks.
This allows designs to be placed and routed efficiently.
The MACH215 has two kinds of macrocell: output and
input. The MACH215 output macrocell provides registered, latched, or combinatorial outputs with programmable polarity. If a registered configuration is chosen,
the register can be configured as D-type or T-type to
help reduce the number of product terms. The register
type decision can be made by the designer or by the
software. Each macrocell has its own dedicated clock,
asynchronous reset, and asynchronous preset control.
The polarity of the clock signal is programmable. All
output macrocells can be connected to an I/O cell.
The MACH215 has dedicated input macrocells which
provide input registers or latches for synchronizing input
signals and reducing setup time requirements.
Publication# 16751
Rev. E
Issue Date: May 1995
Amendment/0
