End of Life - August 2013
FP..P
www.vishay.com
Vishay Dale
Metal Film Resistors, Pulse Withstanding Protective
FEATURES
• Special Vishay Dale design provides lightning
withstand characteristics along with resistor
functionality
• A thicker tin oxide power film system provides
lightning surge absorption capabilities
• Higher turns ratio and glass substrate provide
sharper fusing characteristic than the standard
flameproof product line
• Protect against a variety of electrical hazards
which can change or destroy sensitive
electronic equipment including high energy voltage
surges caused by power line anomalies (direct power
crosses or inductively coupled effects) and other
momentary overvoltages
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING
P70 °C
W
RESISTANCE
RANGE (2)
TOLERANCE
±%
CUTOFF VALUE (1)
FP1/2P
FP001P
FP002P
FP003P
FP069P
FP1/2P
FP1P
FP2P
FP3P
FP69P
0.5
1
2
3
2
10 to 1M
10 to 1M
355 to 125K
46.4 to 125K
25 to 126K
1, 2, 5
1, 2, 5
1, 2, 5
1, 2, 5
1, 2, 5
2K00
1K00
355R
250R
400R
Notes
Pulse withstanding capabilities are value dependent. Values above the cutoff value will meet all of the surge test requirements shown on the
following pages.
(2) Contact factory for values outside these published ranges.
(1)
MARKING
- DALE
- Value
- Tolerance
- Style and case size
- Date code (year/week)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FP002P1K00F9256B8 (preferred part numbering format)
F
P
0
0
2
P
1
K
0
0
F
9
2
5
6
B
8
GLOBAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
SPEC CODES
PACKAGING (3)
(See Standard
Electrical
Specifications
table)
R=
K = k
M = M
10R0 = 10
1K30 = 1.3 k
1M00 = 1.0 M
F=±1%
G=±2%
J=±5%
5555 = FP1/2P
6206 = FP001P
9256 = FP002P
9303 = FP003P
7532 = FP069P
EK = Lead (Pb)-free, strip
EA = Lead (Pb)-free, T/R
B8 = Tin/lead, strip
CH = Tin/lead, T/R (750 pieces)
CJ = Tin/lead, T/R (1000 pieces)
Historical Part Number: FP2P 1K00 1 % B8 (will continue to be accepted)
FP2P
1K00
1%
B8
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
Notes
(3) Some packaging codes are model specific.
(4) For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).
Revision: 05-Feb-13
Document Number: 31030
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000