®
P6KE SERIES
600W TRANSIENT VOLTAGE SUPPRESSOR
WON-TOP ELECTRONICS
Pb
Features
Glass Passivated Die Construction
600W Peak Pulse Power Dissipation
5.5V – 513V Standoff Voltage
Uni- and Bi-Directional Versions Available
Excellent Clamping Voltage
Typical Response Time < 1nS
Plastic Case Material has UL Flammability
Classification Rating 94V-0
A
B
A
C
D
Mechanical Data
Case: DO-15, Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Cathode Band Except Bi-Directional
Weight: 0.40 grams (approx.)
Mounting Position: Any
Marking: Type Number
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 6
Maximum Ratings and Electrical Characteristics
Characteristic
Dim
DO-15
Min
A
25.4
—
B
5.50
7.62
C
0.71
0.864
D
2.60
3.60
Max
All Dimensions in mm
@TA=25°C unless otherwise specified
Symbol
Value
Unit
Peak Pulse Power Dissipation on 10/1000µS Waveform (Note 1, 2, 5)
PPPM
600
W
Peak Pulse Current on 10/1000µS Waveform (Note 1)
IPPM
See Table 1
A
Peak Forward Surge Current (Note 2, 3)
IFSM
100
A
Maximum Instantaneous Forward Voltage at 50A (Note 3, 4)
VF
3.5 / 5.0
V
Power Dissipation at TL = 75°C (Note 2)
PD
5.0
W
RθJA
RθJL
75
20
°C/W
TJ, TSTG
-55 to +150
°C
Typical Thermal Resistance, Junction to Ambient (Note 2)
Typical Thermal Resistance, Junction to Lead (Note 2)
Operating and Storage Temperature Range
Note: 1. Non-repetitive current pulse per Figure 5 and derated above TA = 25°C per Figure 1.
2. Mounted on 40 x 40 x 1.0mm thick copper pads to each terminal that maintained at a distance of 9.5mm from the case.
3. Measured on 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. For uni-directional devices only.
4. VF < 3.5V for VBR ≤ 200V and VF < 5.0V for VBR ≥ 201V.
5. Peak pulse power waveform is 10/1000µS.
© Won-Top Electronics Co., Ltd.
Revision: September, 2012
www.wontop.com
1