Ordering number:ENN5170
Thick Film Hybrid IC
STK392-110
3-Channel Convergence Correction Circuit
(IC max = 3A)
Overview
Package Dimensions
The STK392-110 is a convergence correction circuit IC for
video projectors. It incorporates three output amplifiers in
a single package, making possible the construction of CRT
horizontal and vertical convergence correction output circuits for each of the RGB colors using ust two hybrid ICs.
The output circuit use a class-B configuration, in comparison with the STK392-010, realizing a more compact package and lower cost.
unit:mm
4083
[STK392-110]
64.0
55.6
25.8
16.5
Applications
21.0
3.6
31.0
8.5
• Video projectors
Features
• 3 output amplifier circuits in a single package
• High maximum supply voltage (VCC max = ±38V)
• Low thermal resistance (θj-c=3.0°C/W)
• High temperature stability (TC max=125°C)
• Separate predriver and output stage supplies
• Output stage supply switching for high-performance
designs
• Low inrush current when power is applied
18
2.54
17×2.54=43.18
(6.21)
2.9
0.4
4.0
1
0.5
5.5
SANYO : SIP18
Series Organization
The following devices form a series with varying output capacity and application grade. Some of the devices below are
under development, so contact your nearest sales representative for details.
Maximum ratings
VCC max
IC max
θj-c
Maximum horizontal frequency
fH max
STK392-110
±38V
3A
3.0˚C/W
15kHz
STK392-010
±38V
5A
2.6˚C/W
15kHz
General projection TVs
STK392-020
±44V
6A
2.1˚C/W
35kHz
HD, VGA
Type No.
Application grade
General projection TVs
STK392-040
±50V
7A
1.8˚C/W
100kHz
XGA, CAD, CAM
STK392-210
±65V
8A
1.5˚C/W
130kHz
CAD, CAM
STK392-220
±75V
10A
1.3˚C/W
160kHz
CAD, CAM
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
93099TH (KT)/80995HA (ID) No.5170–1/4
