Original Plugs
XG8
Original Plug that can be used in a wide
range of applications.
■ Can use as a Plug for different Sockets.
■
■
■
■
Applicable Sockets:
XG4M Flat Cable Connector
XG5 Discrete-wire IDC Connector
Through-holes handle 0.8-mm wires.
With Double-row Plugs with right-angle terminals,
block-base soldering improves productivity while
lock levers simplify locking (excluding XG8V and
XG8W Plugs with straight terminals).
Simply cut to divide (excluding XG8W Right-angle Plugs).
Standard models are approved by UL standards
(file No. E103202) (XG4A and XG8B only)
RoHS Compliant
■ Connectors
For MIL Connectors
Model
XG8V
Appearance
Single-row plugs with
straight terminals
Page
2
Model
XG8A
Appearance
Single-row plugs with
straight terminals
Page
XG8W
4
Single-row plugs with
right-angle terminals
Double-row plugs with
straight terminals
Double-row plugs with
right-angle terminals
3
XG8B
Single-row plugs with
right-angle terminals
■ Ratings and Characteristics
Rated current
20 mΩ max. (at 20 mV, 100 mA max.) (See note 2.)
Insulation resistance
■ Cross-sectional View of Terminal
300 VAC
Contact resistance
Double-row plugs with
right-angle terminals
3 A (See note 1.)
Rated voltage
Double-row plugs with
straight terminals
1,000 MΩ min. (at 500 VDC)
Dielectric strength 650 VAC for 1 min (leakage current: 1 mA max.)
Ambient operating
temperature
Note:
Operating: −55 to 105°C (with no icing)
1. The rated current will depend on the Socket you are using. It is 1 A using the XG4M for example.
2. The contact resistance is measured with the Plug mated to an XG5M-N.
■ Materials and Finish
0.75 dia.
■ Applicable Sockets
XG8W and XG8B
(Double Row)
XG4M Flat Cable Connectors (Sockets)
XG4H Board-to-Board Connectors (Sockets)
XG5M-N Discrete-wire IDC Connectors
(Double-row Sockets)
XG5N Discrete-wire IDC Sockets
Model
XG8V and XG8W (See note.)
Base
Fiber-glass reinforced PBT resin (UL94V-0)/black
Contacts
Mating
end
Terminal
Note:
Brass/nickel base, 0.15-µm
gold plating
Brass/nickel base, 2.0-µm
tin plating
XG8A and XG8B
Brass/nickel base, 0.15µm gold plating
Brass/nickel base, 2.0µm tin plating
Two types of contacts and mating ends, one with gold
plating and the other with tin plating, are available.
1