Connector
Accessories
447-425
EMI/RFI Non-Environmental Band-in-a-Can Backshell
With Cable Clamp Strain-Relief
Rotatable Coupling - Standard Profile
Connector Designators:
Basic Number
MIL-DTL-38999 Series I, II (F)
MIL-DTL-38999 Series III and IV (H)
Connector Designator
F and H
F-H
447
ROTATABLE
COUPLING
F S 425
H
J
S
.500 (12.7)
Max Typ
See Note 6
Cable
Entry
Typ
B Type
(See Note 1)
STYLE II
(See Note 3)
L Typ
G
E
.880 (22.4)
Max
K Typ
SYMBOL ‘S’
STRAIGHT
Knurl Style
Mfr Option Typ
STRAIGHT
Length: S only
(1/2 inch increments,
e.g. 8 = 4.00 inches)
Shell Size
- 45°
- 90°
- Straight
Length
(see Note 2)
A Thread Typ
(See Note 1)
Cable Entry
M 18 12 - 5
Contact Style
Product Series
Length
(See Note 2)
Finish
H
J Ref
Typ
J Ref
Typ
F
SYMBOL J
90°
H
SYMBOL H
45°
APPLICATION NOTES
1.
Standard minimum length for Style I is 1 inch (25.4), Style II
is 1.5 inches (38.1). Consult factory about shorter lengths
(Note: Applies to Symbol S Straight only).
2.
When cable diameter exceeds “Max Dash No” in Table I, Style
II will be supplied.
3.
For effective grounding, connector with conductive finish
should be used.
4.
Glenair Series 600 Backshell Assembly tools are
recommended for assemply and installation.
© 2010 Glenair, Inc.
5.
For shield termination see Glenair Drawings 600-050 and
600-052.
6.
Material/Finish:
Adapters, Elbows, Coupling Nuts, Ferrule, Clamp - Al
Alloy/See Table I
Hardware - Cres/Passivate
7.
Metric dimensions (mm) are indicated in parentheses.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
H-22
E-Mail: sales@glenair.com
