CC5
Vishay Electro-Films
CHIP
RESISTORS
Thin Film 1010 Size Resistor on Alumina
FEATURES
• Wire bondable
• Chip size: 0.100 inches square
Product may not
be to scale
• Resistance range: 50 Ω to 1M Ω
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistor material: Nichrome
The CC5 series single-value resistor chips offer increased
power in larger size, low shunt capacitance and solder pad
option. The CC5s nichrome resistor material offers excellent
stability.
The CC5s are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CC5s are 100% electrically tested and
visually inspected to MIL-STD-883.
• DC power rating: 400 mW
• Resistor passivation coat optional
• Tolerances to 0.05 %
• Solder pad optional
APPLICATIONS
Vishay EFI CC5 chip resistors have excellent power dissipation capability and are ideally suited for prototyping. Not suitable for
high moisture applications unless protected.
Typical application areas are:
• Amplifiers
• Couplers
• Oscillators
• Filters
• Attenuators
Recommended for hermetic environments where die is not exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
0.05 %
0.1 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
50 Ω
100 Ω
500 kΩ
1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Stability, 1000 h, + 125 °C
Operating Temperature Range
Thermal Shock, MIL-STD-202,
Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
www.vishay.com
30
For technical questions, contact: efi@vishay.com
- 20 dB typ.
± 0.1 % max. ΔR/R
- 55 °C to + 125 °C
± 0.25 % max. ΔR/R
± 0.25 % max. ΔR/R
200 V
1012 min.
200 V max.
400 mW max.
± 0.25 % max. ΔR/R
Document Number: 61005
Revision: 10-Mar-08
