VH CONNECTOR
High box type
3.96mm pitch/Disconnectable Crimp style connectors
Specifications –––––––––––––––––––
• Current rating: 7 A AC, DC (AWG #18)
10 A AC, DC (AWG #16)/1 circuit only
• Voltage rating: 250 V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10 mΩ max.
After environmental tests/ 20 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 1,500 VAC/minute
• Applicable wire: AWG #22 to #16
• Applicable PC board thickness: 1.6 mm
Note: Do not branch in parallel current which exceeds the rated current. If
branched in parallel,current imbalance or other problems may develop.
If it is absolutely necessary to branch such a large current in parallel,
be sure to use contacts made of phosphor bronze. Design the circuits
without causing imbalance and provide an extra margin for each circuit.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
* Compliant with RoHS.
Header for 3.96mm pitch VH connector for
use specifically with resin coated ("potted")
PC boards.
• Interchangeability
Standards ––––––––––––––––––––––
0
Recognized E60389
1 Certified LR20812
2 R75122
<2 to 8 circuits>
10.5
10.6
±0.1
8
＋0.1
0
1.3
1.5
＋0.1
0
±0.05
1.3
＋0.1
±0.05
φ 0
1.4
±0.1
±0.05
(21.3)
φ
1.65 0
3.4
＋0.1
0
φ1.65
＋0.1
(18.6)
3.6
±0.1
3.6
0.8
±0.1
3.96
Note: 1. The above figure is the figure viewed from soldering side.
2. Tolerances are non-cumulative: ±0.05mm for all centers.
3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guide line. Contact JST for details.
1
