AZ847
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: Height: .217 inches (5.5 mm);
Length: .551 inches (14 mm); Width: .354 inches (9 mm)
• High sensitivity, 79 mW pickup
• Monostable and bistable (latching) two coil versions
available
• Meets FCC Part 68.302 1500 V lightning surge
• DIP terminal layout, fits 10 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• UL file E43203, CSA 73363
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
5 x 105 at 1 A 30 VDC, Res.
2 x 105 at 0.5 A 125 VAC, Res.
Operate Time (typical)
2 ms at nominal coil voltage
Release Time (typical)
1 ms at nominal coil voltage
(with no coil suppression)
Set Time
(bistable versions)
2 ms at nominal coil voltage (typical)
Reset Time
(bistable versions)
2 ms at nominal coil voltage (typical)
Dropout
Greater than 10% of nominal coil voltage
Capacitance
Contact to contact: 0.5 pF
Contact set to contact set: 1.5 pF
Contact to coil: 1.0 pF
Dielectric Strength
(at sea level)
1000 Vrms between contact sets
1000 Vrms across contacts
1,250 Vrms contact to coil
Meets FCC part 68.302 1500 V lightning
surge
Insulation Resistance
1000 megohms min. at 25°C, 500 VDC,
50% RH
CONTACTS
Arrangement
Ratings
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max.
Max.
Max.
Max.
Rated Load
UL/CSA
switched power: 60 W or 62.5 VA
switched current: 2 A
switched voltage: 220 VDC or 250 VAC
carry current:
2A
0.5 A at 125 VAC res.
2.0 A at 30 VDC res.
0.3 A at 110 VDC res.
Material
Silver palladium; gold clad
Resistance
< 50 milliohms initially
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Single side stable:
70–150 mW
Bistable (latching) two coil: 100–150 mW
Max. Continuous
Dissipation
700 mW at 20°C (68°F) ambient
530 mW at 40°C (104°F) ambient
Temperature Rise
18°C (32°F) at nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Max. 105°C (221°F)
Vibration
.130" DA at 10–55 Hz
Shock
50 g
Enclosure
LCP
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
1.2 grams
Temperature
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay has fixed coil polarity.
Relay may pull in with less than “Must Operate” value.
Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.
5/24/04W
