HOME在庫検索>在庫情報

部品型式

V23072-C1061-A308

製品説明
仕様・特性

Automotive Relays PCB Relays Mini Relay K (Open – Sealed) n n Limiting continuous current 20A 24VDC coil versions available Typical applications Car alarm, hazard warning signal, heated rear screen, immobilizer, lamps front/rear, fog light, interior lights, sun roof, turn signal, wiper control. F072A/C_fcw2b Contact Data Load resistive/inductive resistive/inductive resistive/inductive head/indicator head/indicator load load load lamp lamp V23072-C10**-A302 V23072-C10**-A303 V23072-C10**-A308 V23072-C1061-A402 V23072-C1061 A408 Contact arrangement 1 form A, 1 NO 1 form C, 1 CO 1 form U/X, 2 NO 1 form A, 1 NO 1 form U/X, 2 NO Rated voltage 12VDC 12VDC 12VDC 12VDC 12VDC Rated current 15A 10/15A 2x10A 12A 2x6A Limiting continuous current 23°C 15A 10/15A 2x10A 12A 2x6A 85°C 10A 5/10A 2x6A 10A 2x5A 1)2) 3) 120A3) Limiting making current 60A NC/NO 12/60A 2x40A 60A Limiting breaking current 20A 10/20A 2x20A 6A 12A Contact material AgNi0.15 AgNi0.15 AgNi0.15 AgSnO.2 AgSnO.2 Min. recommended contact load 4) 1A at 5VDC 1A at 5VDC 1A at 5VDC 1A at 5VDC 1A at 5VDC Initial voltage drop at 10A, typ./max. 50/300mV 50/300mV 2x50/300mV 150/300mV 150/300mV Operate/release time max. typ. 3/1.5ms5) Electrical endurance >2x105 ops. >2x105 ops. >2x105 ops. >1x106 ops. >1.5 x 106 ops. at 13.5VDC, 10A at 13.5VDC, 10A at 13.5VDC, 10A up to 6x21W up to 6x21W >1.5x105 ops. >7.5x105 ops. 100A (on), 10 A (off) 100A (on), 10A (off) high beam high beam 1) The values apply to a resistive load or inductive load with suitable spark suppression and at maximum 13.5VDC for 12VDC and 27VDC for 24VDC load voltages. 2) For a load current duration of maximum 3s for a make/break ratio of 1:10. 3) Corresponds to the peak inrush current on initial actuation (cold filament). 4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes 5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding (monostable version only). Max. DC load breaking capacity Load limit curve 1: safe shutdown, connected as form X, load on pin 5 and 7. Load limit curve 2: safe shutdown, no stationary arc (NO contact). Load limit curve 3: arc extinguishes during transit time (CO contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. 06-2011, Rev. 0611 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1

ブランド

SIEMENS

供給状況

 
Not pic File
お探しのV23072-C1061-A308は、弊社スタッフが在庫確認を行いメールにて御回答致します。

「見積依頼」ボタンを押してお気軽にお進み下さい。

ご注文方法

弊社からの見積回答メールの返信又はFAXにてお願いします。


お取引内容はこちら

0.1661720276