SMAJ HV SERIES
creat by art
400 Watts Suface Mount Transient Voltage Suppressor
SMA/DO-214AC
Features
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from
0 volt to BV min
Typical IR less than 1uA above 10V
High temperature soldering guaranteed:
260℃ / 10 seconds at terminals
Meet MSL level 1, per J-STD-020,
LF maximum peak of 260℃
Plastic material used carried Underwriters
Laboratory Flammability Classification 94V-0
400 watts peak pulse power capability with a 10 x
1000 us waveform
Green compound with suffix "G" on packing
code & prefix "G" on datecode
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated, lead free
Polarity: Indicated by cathode band
Packaging: 12mm tape per EIA Std RS-481
Weight: 0.064 gram
Ordering Information (example)
Part No.
Package
Packing
SMAJ200A
SMA
Packing code
Packing code
(Green)
R3
R3G
1.8K / 7" REEL
Maximum Ratings and Electrical Characteristics
Rating at 25 ℃ ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1)
PPK
400
Watts
Steady State Power Dissipation
PD
1
Watts
Peak Forward Surge Current, 8.3ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method)
IFSM
40
Amps
VF
3.5
Volts
TJ, TSTG
-55 to +150
℃
Maximum Instantaneous Forward Voltage at 25.0A for
Unidirectional Only
Operating and Storage Temperature Range
Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25℃ Per Fig. 2
Version:D13