S5V5 Pin Diode Switch
Single Pole, Five Throw
Absorptive
Features:
•
Incorporated TTL-compatible driver for
convenient system integration and operates
from +5 V and -15 V DC power supplies.
•
DC blocks at all RF ports.
•
Ruggedized construction.
•
RoHS-compliant versions available.
•
Hermetic versions available.
Specifications:
Parameter
Specification
Units
0.1 – 8
GHz
Insertion Loss (max)
3.8
dB
VSWR (max) 50 ohms
2.0
ratio
Isolation (min)
75
dB
Switching Speed (max)
250
nsec
CW RF Power, Operating (max)
0.5
W
Frequency Range
Notes:
Mechanical Specifications:
DC Bias:
(Standard)
+5 V +/- 0.5 V @ 160 mA max
-15 V +/- 3 V @ 50 mA max
DC Bias:
(-5 option)
+5 V +/- 0.5 V @ 200 mA max
-5 V +/- 0.5 V @ 60 mA max
DC Bias:
(-12 option)
+15 V +/- 3 V @ 160 mA max
-15 V +/- 3 V @ 50 mA max
Control:
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
E5 controls J6 – J1
Absorptive Switch: 50 ohm termination present at J2, J3, J4, J5
and J6 (in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp:
-55 °C to +85 °C
Storage Temp:
-65 °C to +125 °C
Humidity:
MIL-STD-202F, M103, Cond B
Shock:
MIL-STD-202F, M213, Cond B
Altitude:
MIL-STD-202F, M105, Cond B
Vibration:
MIL-STD-202F, M204, Cond B
Thermal Shock:
MIL-STD-202F, M107, Cond A
Temperature Cycle:
MIL-STD-202F, M105C, Cond D
SIGNAL & CONTROL SOLUTIONS
Revision Date: 2/25/2014
Case Styles:
S5 Outline (Five bit control)
S5-3 Outline (Three bit control)
Finish:
Gold Plate per MIL-G-45204
Bias & Control Pins:
ø0.02” x 0.15” long
Weight:
60 g max
Mounting:
ø0.10” through holes
(2) places
Three Bit Control:
E3 E2 E1
Low Loss Path
(-3 option)
0
0 0
J2 - J1
0
0 1
J3 - J1
0
1 0
J4 - J1
0
1 1
J5 - J1
1 0 0
J6 - J1
1 0 1
ALL OFF
1 1 0
ALL OFF
1 1 1
ALL OFF
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the
factory to discuss your screening requirements.
40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/ascs, email: ascs-sales@aeroflex.com