MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
KXJ
160 to 500Vdc, long life, 105℃
Upgrade!
Series
KXJ
・Downsized and Longer life from current KXG series
・Endurance with ripple current : 8,000 to 12,000 hours at 105℃
・Rated voltage range : 160 to 500V, Capacitance range : 6.8 to 680µF
・For electronic ballast circuits and other long life applications
・Non solvent resistant type
・RoHS Compliant
Downsized
KXG P170
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
– 40 to +105℃ (160 to 400Vdc)
-25 to +105℃ (420 to 500Vdc)
Rated Voltage Range 160 to 500Vdc
Capacitance Tolerance ±20% (M)
(at 20℃, 120Hz)
After 1 minute
After 5 minutes
Leakage Current
CV≦1000
I=0.1CV+40
I=0.03CV+15
CV> 1000
I=0.04CV+100
I=0.02CV+25
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃)
Rated voltage (Vdc)
Dissipation Factor
160 to 250V 350 to 500V
(tanδ)
tanδ (Max.)
0.20
0.24
(at 20℃, 120Hz)
Low Temperature
Rated voltage (Vdc)
160 to 250V
350, 400V
420 to 500V
Characteristics
Z(−25℃)/Z(+20℃)
3
5
6
(Max. Impedance Ratio)
Z(−40℃)/Z(+20℃)
(at 120Hz)
6
6
−
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
Endurance
ripple current is applied(the peak voltage shall not exceed the rated voltage) for the specified time at 105℃.
160 to 450V
500V
Rated voltage (Vdc)
Time
20L 10,000hours、 to 50L 12,000hours
:
25L
:
φ10 8,000hours、
:
φ12.5 to φ18 10.000hours
:
Capacitance change
≦±20% of the initial value
D.F . (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
Shelf Life
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦
±20% of the initial value
D.F . (tanδ)
≦200% of the initial specified value
Leakage current
≦500% of the initial specified value
◆DIMENSIONS [mm]
F±0.5
Code : E
φD'
φd
Sleeve (PET : Brown)
F±0.5
●Terminal
φD
φd
F
φD'
L'
Vent
15min.
4min.
φ
18)
( 12.5 to φ
(φ
10)
L'
10
0.6
5.0
12.5 14.5 16
0.6 0.8 0.8
5.0 7.5 7.5
φD+0.5max.
L+1.5max.
18
0.8
7.5
Gas escaped end seal
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E KX J AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101)
Lead forming·taping code
T erminal code
Voltage code (ex. 160V:161,400V:401)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
166
CAT. No. E1001N