HOME>在庫検索>在庫情報
XMP-11V
XM CONNECTOR 2.5mm pitch/Crimp style wire-to-wire connectors Specifications ––––––––––––––––––– The retainer provides added protection against non-insertion or disconnection. • Inner-housing lock • Secondary retainers • Housing lance • Mountable on a variety of panels • Contacts smoothly insert into the housings without colliding with internal obstacles • Current rating: 3A AC, DC max. • Voltage rating: 250V AC, DC max. • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 500M Ω min. • Withstanding voltage: 1,500V AC/minute • Applicable wire: AWG #28 to #20 0.08 to 0.50mm2 • Applicable panel thickness: 0.5 to 1.8mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards––––––––––––––––––––––– 0 Recognized E60389 1 Certified LR20812 Panel Layout and Assembly layout (18 circuits) 15.5 7.9 (2 to 12 circuits) 24.4 24.4 +0.1 A 0 +0.1 B±0.05 Circuits Receptacle housing +0.1 0 B±0.05 Panel hole dimensions (mm) General tolerance A +0.1 0 B±0.05 2 XMR-02V 9.3 XMR-03V 10.3 13.6 4 XMR-04V 12.8 16.1 5 XMR-05V 15.3 18.6 6 XMR-06V 17.8 21.1 7 XMR-07V 20.3 23.6 8 XMR-08V 22.8 26.1 Applicable panel thickness (mm) 12.6 3 9 XMR-09V 25.3 28.6 10 XMR-10V 27.8 31.1 11 XMR-11V 30.3 33.6 12 XMR-12V 32.8 36.1 18 XMR-18V 25.3 28.6 Note: 1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 15.8 11.6±0.05 +0.1 0 8.2 5.5±0.05 A 0 0.5∼1.8
JST
日本圧着端子製造株式会社
日本
主にコネクタ、圧着端子を製造する電子接続部品メーカー。
見積依頼→在庫確認→見積回答→注文→検収→支払 となります。