TC74VHCT367AF/AFT
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC74VHCT367AF, TC74VHCT367AFT
Hex Bus Buffer
TC74VHCT367AF/AFT
Non-Inverted,
3-State Outputs
The TC74VHCT367A is advanced high speed CMOS HEX BUS
BUFFERs fabricated with silicon gate C2MOS technology.
They achieve the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
They contain six buffers ;four buffers are controlled by an
enable input ( G1 ), and the other two buffers are controlled by
another enable input ( G2 ). The outputs of each buffer group are
enabled when G1 and/or G2 inputs are held low; if held high,
these outputs are in a high impedance state.
The TC74VHCT367A is a non-inverting output type.
Input protection and output circuit ensure that 0 to 5.5 V can
be applied to the input and output (Note) pins without regard to
the supply voltage. These structure prevents device destruction
due to mismatched supply and input/output voltages such as
battery back up, hot board insertion, etc.
Note:
TC74VHCT367AF
TC74VHCT367AFT
Weight
SOP16-P-300-1.27A:
TSSOP16-P-0044-0.65A:
Output in off-state
0.18 g (typ.)
0.06 g (typ.)
Features
•
High speed: tpd = 4.7 ns (typ.) at VCC = 5 V
•
Low power dissipation: ICC = 4 μA (max) at Ta = 25°C
•
Compatible with TTL inputs:
•
Power down protection is provided on all inputs and outputs.
•
Balanced propagation delays: tpLH ≈ tpHL
•
Low noise: VOLP = 0.8 V (max)
•
Pin and function compatible with the 74 series
(74AC/HC/F/ALS/LS etc.) 367 type.
VIL = 0.8 V (max)
VIH = 2.0 V (min)
Start of commercial production
1997-11
1
2014-03-01
