MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
LXZ
Low impedance, Downsized, 105℃
LXZ
Series
Lower Z
Downsized
●Adoption
of innovative electrolyte and new technologies
low impedance at high frequency
●Endurance with ripple current: 2,000 to 8,000 hours at 105℃
●Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
●Very
LXY
Lower Z
LXV
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-55 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 63Vdc
(at 20℃, 120Hz)
±20% (M)
I=0.01CV or 3µA, whichever is greater.
(at 20℃ after 2 minutes)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V
tanδ(Max.)
0.22 0.19 0.16 0.14 0.12 0.10 0.08
(at 20℃, 120Hz)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time
φ5 & 6.3 : 2,000hours φ8 : 3,000hours φ10 : 5,000hours φ12.5 : 7,000hours φ16 & 18 : 8,000hours
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
Dissipation Factor
(tan )
δ
Endurance
Shelf Life
◆DIMENSIONS [mm]
φd
F±0.5
Code : E
Sleeve (PET : Dark blue)
F±0.5
●Terminal
φD
φD'
φd
F
φD'
L'
15min.
4min.
(φ5 to φ10)
(φ12.5 to φ18)
L'
5
0.5
2.0
6.3
0.5
2.5
10 12.5
8
0.6 0.6 0.6
3.5 5.0 5.0
φD+0.5max.
L+1.5max.
16
0.8
7.5
18
0.8
7.5
Gas escape end seal
Vent
(Exceptφ5 & φ6.3)
◆PART NUMBERING SYSTEM
1
2
3
4
E LXZ
5
6
7
8
E
9
10
11
12
13
14
15
16
17
18
M
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 150µF:151, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 25V:250, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/3)
CAT. No. E1001M
