TA48M025,03,033,0345,04,05F
TOSHIBA Bipolar Linear Integrated Circuit
Silicon Monolithic
TA48M025F,TA48M03F,TA48M033F,
TA48M0345F,TA48M04F,TA48M05F
2.5 V, 3 V, 3.3 V, 3.45 V, 4 V, 5 V
Three-Terminal Low Dropout Voltage Regulator
The TA48M**F series consists of fixed-positive-output, low
dropout regulators with an output current of 500 mA (max). In
response to the need for low voltage devices, the series offers
devices with low output voltages of 2.5 V, 3 V, 3.3 V, 3.45 V, and 4
V, which are not included in the existing TA78DM**S series (0.5
A low dropout).
TA48M**F (S)
Features
•
Maximum output current of 0.5 A
•
Low standby current: 0.8 mA (typ.)
•
Low dropout voltage: 0.65 V (max) @IOUT = 0.5 A
•
Protection function:
overheat/overcurrent/overvoltage/reversed power supply
connections.
•
PW-Mold package:
Surface-mount type for reflow soldering is also supported.
TA48M**F (LBS1, S) (TE16L, S)
Pin Assignment
Weight
HSIP3-P-2.30B: 0.36 g (typ.)
HSOP3-P-2.30A: 0.36 g ( typ.)
Marking side
1
3
IN
2
GND OUT
Marking
3
48M**F
Product No. (or abbreviation code)
Lot No.
1
3
2
A line indicates
Lead(Pb)-Free Finish.
The product(s) in this document (“Product”) contain functions intended to protect the Product from
temporary small overloads such as minor short-term overcurrent, overvoltage, or overheating. The
protective functions do not necessarily protect Product under all circumstances. When incorporating
Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2)
to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence.
For details, please refer to the notes appearing below in this document and other documents referenced
in this document.
1
2008-04-22
