FPC Connectors
EF-5D Series
0.5mm Pitch, For Shield FPC (SMT)
● Right Angle Type CFP87
-0101F
No. of Pins
0.35
A+5.85=B
0.2
6.1
Open
0.35
0.5
0.2
(n-1)X0.5=A
C
C
Close
1.25
■ Features
A
08
20
30
40
50
C
9.35
15.35
20.35
25.35
30.35
2.5
2.5
2.5
2.8
2.8
■ P.C. Board Dimension
1.35
1.5
2.2
6.6
0.3
0.5
A
0.9
0.7
■ Specification
1. Rating : 0.5A, 50V AC/DC
2. Contact Resistance : 30mΩ max., initially
3. Insulation Resistance : 100MΩ min. at 100V DC
4. Withstanding Voltage : 100V AC (for one minute)
5. Operating Temperature Range : –40˚C to +85˚C
B
3.5
9.5
14.5
19.5
24.5
No. of Pins
6.1
0.9
1. Compatible with high-speed serial transmission such as
LVDS and TMDS (HDMI), same performance as micro
coaxial.
2. Differential impedance matches 100Ω.
3. Double-sided FPCs are used and strengthened the signal
and ground layers. An EMI Solutions is taken by having the
connector featuring our original double-contact structure
cause the FPC ground layer to contact. The signal side can
be tailored to any pin assignment.
4. Our orignal front flip lock structure ensures multi pins
products of high level contact reliability.
• The structure which relieves the load from the cover when
the FPC is locked will prevent detachment or breakage of
the cover.
• There are no restrictions to the direction in which the FPC
can be laid.
5. By turning the cover, an FPC can be connected easily with
only a small force.
6. Mechanisms for prevention of disconnection and top-forbottom reversal insertion of an FPC are provided.
7. Low profile 2.5mm (20, 30P) and 2.8mm (50P) height
when mounted.
8. Both upper and lower contact design.
9. Using the ZIF structure.
10.Supplied in the embossed taping with automatic mounter.
■ Applicable FPC Dimension
(A+2.4)
A
0.5
0.35
6
.2
.2
R0
(A+3.5)
7
m
R0.2
0.
●
C
R
.2
R0
R0
x.
a
2
0.
(A+1.7)
(A+1.1)
1.2
0.6
.2
R0
2.65
1.85
1.35
0.55
0.3
1.75
● Housing : Thermoplastic Resin, Natural Color, 94V-0
● Cover : Thermoplastic Resin, Black, 94V-0
● Contact : Cu Alloy, Au Plating
● Hold down : Cu Alloy, Sn Alloy Plating
0.3
2.35
■ Material and Plating
FPC
insertion
Upper Side
(A+0.8)
Lower Side
FPC plating to recommend : Au plating
9