ALUMINUM ELECTROLYTIC CAPACITORS
Chip Type, High CV
UR series
Chip type, higher capacitance in larger case sizes.
Designed for surface mounting on high density PC board.
WS
Applicable to automatic mounting machine fed with carrier tape.
Compliant to the RoHS directive (2002/95/EC). High
Temperature
Reflow
Extended
UG
range
UR
Higher
C/V
WX
Specifications
Item Performance Characteristics
Category Temperature Range –40 to +85°C
Rated Voltage Range 4 to 100V
Capacitance Range
Rated 3.3 to 1500µF
Capacitance Tolerance
±20% at 120Hz, 20°C
Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA) .
Measurement frequency : 120Hz at 20°C
Rated voltage (V) 4 6.3 10 16 25 35 50 63 100
Tangent of loss angle (tan δ)
tan δ (MAX.) 0.35
0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.12
Measurement frequency: 120Hz
Rated voltage (V) 4 6.3 10 16 25 35 50 63 100
Stability at Low Temperature
Impedance ratio Z–25°C / Z+20°C 7 5 4 3 2 2 2 2 2
ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 10 8 6 4 3 3 3 3
Capacitance change Within ±20% of the initial capacitance value
The specifications listed at right shall be met when
tan δ 200% or less than the initial specified value
Endurance the capacitors are restored to 20°C after the rated
voltage is applied for 2000 hours at 85°C. Leakage current Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
Shelf Life
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
The capacitors are kept on a hot plate for 30 seconds,
Capacitance change Within ±10% of the initial capacitance value
Resistance to soldering
which is maintained at 250°C. The capacitors shall meet
tan δ Less than or equal to the initial specified value
the characteristic requirements listed at right when they
heat
Leakage current Less than or equal to the initial specified value
are removed from the plate and restored to 20°C.
Marking Black print on the case top.
Type numbering system (Example : 10V 100 F)
Chip Type µ
1 2 3 4 5 6 7 8 9 10 11 12 13 14
(φ6.3, φ8 × 6.2)
Positive
U U R 1 A 1 0 1 M C L 1 G S
Plastic platform
0.3MAX.
C±0.2
Capacitance Package code
2Voltage
Lot No.
Size code
Configuration
1
Capacitance tolerance (±20%)
φ D × L Code
Trade mark
6.3 × 5.8 CL
Rated capacitance (100F) µ
6.3 × 7.7 CL
Rated voltage (10V)
L±0.3
Negative
8 × 6.2 CL
H
1 Size φ8 × 6.2 only
Series name
8 × 10 NL
2
Voltage mark for 6.3V is 6V .
Type
10 × 10 NL
(φ8 × 10, φ10 × 10)
(mm)
Positive
φ D × L
Plastic platform 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 10
Lot No. Capacitance 0.3MAX. C±0.2
A 2.4 2.4 3.3 2.9 3.2
2 Voltage
Trade mark B 6.6 6.6 8.3 8.3 10.3
C 6.6 6.6 8.3 8.3 10.3
E 2.2 2.2 2.3 3.1 4.5
L 5.8 7.7 6.2 10 10
H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1
L±0.5
Negative
H
Pressure relief vent
Dimension table in next page.
CAT.8100B
A2 A2
100
220
10V
16V
φD±0.5 φD±0.5
B±0.2 B±0.2
0.5MAX. 0.5MAX.
E
E
A±0.2 A±0.2 A±0.2 A±0.2
