State of the Art, Inc.
2010 Size, Current Sense Chip Resistor
Surface Mount, 4 - Terminal Kelvin
PERFORMANCE CHARACTERISTICS
Resistance Table
0.020 Ohms -1 Ohm
1%, 2%, 5%, 10%,20%
73.3 °C/W
650 mW
150 Volts
Available Range
Resistance (ohms)
Resistance Range
Tolerances
Thermal Resistance
Maximum Power
Maximum Voltage
ENVIRONMENTAL PERFORMANCE *
TCR (-55° + 125°C in ppm/°C )
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
<800 ppm
±0.03%
±0.02%
±0.02%
±0.03%
±0.05%
±0.05%
0.02
0.05
0.10
1.00
1%
2%
5%
10%
20%
Tolerance
*Typical resistance change.Test methods are per MIL-PRF-55342.
Power Derating
Power Dissipation
80
Percent Power
Temperature Rise (°C)
100
Fiber Epoxy Board
Alumina board
60
40
20
0
0
25
Power Dissipation (W)
50
70
100
150
Ambient Temperature (°C)
PART NUMBERING
S 2010 C K X 0R02 J 80 -W
PACKAGING CODE: -TR: Tape & Reel -W: Waffle Carrier (Default packaging is Bulk)
10 ± 100ppm 80 ± 800ppm
TOLERANCES: F:1% G: 2% J: 5% K:10% M: 20%
RESISTANCE VALUE:
Value in ohms. The letter “R” is used to represent the decimal.
TERMINATION FINISH: X: Sn60 over nickel barrier C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS)
PRODUCT DESIGNATION: K: Four Terminal Kelvin Resistor
TERMINATION TYPE: C: Wraparound termination
SIZE CODE
SIZE CODE
GRADE: S: Standard Production H: High Reliability (For screening options, contact the factory)
MECHANICAL
Length
Width (a)
Thickness
Top Conductor Length (b)
Bottom Conductor Length (c)
Bottom Conductor Width (d)
Bottom Conductor Gap Length (e)
Bottom Conductor Gap Width (f)
INCHES
.200 (.198 - .208)
.100 (.098 - .106)
.028 (.023 - .033)
.027 (.022 - .032)
.029 (.024 - .034)
.040 (.036 - .044)
.142 (.138 - .146)
.020 (.016 - .024)
Approx. Weight
MILLIMETERS
5.08 (5.03 - 5.28)
2.54 (2.49 - 2.69)
0.28 (0.58 - 0.84)
0.69 (0.56 - 0.81)
0.74 (0.61 - 0.86)
1.02 (0.91 - 1.12)
3.61 (3.51 - 3.71)
0.51 (0.41 - 0.61)
0.0332 grams
b
a
c
e
f
Wi
dth
d
Le
n
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
gth
.260
.108
.020
.044
.061
.138
State of the Art, Inc., 2470 Fox Hill Road, State College, PA 16803
Phone (814) 355-8004 Fax (814) 355-2714 Toll Free (800) 458-3401
www.resistor.com
All products made in the USA
Specifications Subject To Change Without Notice
Cage Code : 56235
Copyright 2012 By State of The Art Inc.
02/08/13