HA-5002
Data Sheet
October 18, 2013
FN2921.12
110MHz, High Slew Rate, High Output
Current Buffer
Features
The HA-5002 is a monolithic, wideband, high slew rate, high
output current, buffer amplifier.
• High input impedance . . . . . . . . . . . . . . . . . . . . . .3000kΩ
Utilizing the advantages of the Intersil D.I. technologies, the
HA-5002 current buffer offers 1300V/μs slew rate with
110MHz of bandwidth. The ±200mA output current capability
is enhanced by a 3Ω output impedance.
• Very wide bandwidth . . . . . . . . . . . . . . . . . . . . . . 110MHz
The monolithic HA-5002 will replace the hybrid LH0002 with
corresponding performance increases. These characteristics
range from the 3000kΩ input impedance to the increased
output voltage swing. Monolithic design technologies have
allowed a more precise buffer to be developed with more than
an order of magnitude smaller gain error.
• Voltage gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.995
• Low output impedance . . . . . . . . . . . . . . . . . . . . . . . . . 3Ω
• Very high slew rate. . . . . . . . . . . . . . . . . . . . . . . 1300V/μs
• High output current . . . . . . . . . . . . . . . . . . . . . . . . . . ±200mA
• Pulsed output current . . . . . . . . . . . . . . . . . . . . . . . 400mA
• Monolithic construction
• Pb-Free available (RoHS Compliant)
Applications
• Line driver
The HA-5002 will provide many present hybrid users with a
higher degree of reliability and at the same time increase
overall circuit performance.
• Data acquisition
For the military grade product, refer to the HA-5002/883
datasheet.
• High power current booster
• 110MHz buffer
• Radar cable driver
• High power current source
• Sample and holds
• Video products
Ordering Information
PART NUMBER
PART MARKING
TEMP.
RANGE (°C)
-55 to +125
PACKAGE
PKG.
DWG. #
HA2-5002-2
HA2- 5002-2
HA4P5002-5Z (Note 1)
HA4P 5002-5Z
HA9P5002-5Z (Note 1)
5002 5Z
0 to +75
8 Ld SOIC (Pb-free)
M8.15
HA9P5002-9Z (Note 1)
5002 9Z
-40 to +85
8 Ld SOIC (Pb-free)
M8.15
0 to +75
8 Pin Metal Can
T8.C
20 Ld PLCC (Pb-free)
N20.35
NOTE:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2003-2006, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
