CC3
Vishay Electro-Films
CHIP
RESISTORS
Thin Film 0505 Size Resistor on Alumina
FEATURES
• Wire bondable
• Chip size: 0.050 inches square
• Resistance range: 30 Ω to 125 kΩ
Product may not
be to scale
• Alumina substrate
• Low stray capacitance: < 0.2 pF
The CC3 series single-value resistor chips offer a relatively
small size, low shunt capacitance and solder pad option. The
CC3s nichrome resistor material offers excellent stability.
The CC3s are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CC3s are 100 % electrically tested and
visually inspected to MIL-STD-883.
• Resistor material: Nichrome
• Resistor passivation coat optional
• Tolerances to 0.05 %
• Solder pad optional
APPLICATIONS
Vishay EFI CC3 chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
• Amplifiers
• Couplers
• Oscillators
• Filters
• Attenuators
Recommended for hermetic environments where die is not exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
0.1 %
0.05 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
30 Ω
75 Ω
100 Ω
40 kΩ
125 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202
Method 106 - Hermetic Applications
Stability, 1000 h, + 125 °C, 100 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202,
Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
www.vishay.com
26
For technical questions, contact: efi@vishay.com
- 20 dB typ.
± 0.2 % max. ΔR/R
± 0.1 % max. ΔR/R
- 55 °C to + 125 °C
± 0.25 % max. ΔR/R
± 0.1 % max. ΔR/R
400 V
1012 min.
100 V
100 mW max.
± 0.25 % max. ΔR/R
Document Number: 61002
Revision: 07-Mar-08