HLMP-R100, HLMP-0301, HLMP-0401, HLMP-0504
2.5 mm x 7.6 mm Rectangular LED Lamps
Data Sheet
Description
Features
The HLMP-R100, -0301, -0401, ‑0504 are solid state
lamps encapsulated in a radial lead rectangular epoxy
package. They utilize a tinted, diffused epoxy to
provide high on-off contrast and a flat high intenity
s
emitting surface. Borderless package design allows
creation of uninterrupted light emitting areas.
• Rectangular light emitting surface
The HLMP-R100 uses a double heterojunction (DH)
absorbing substrate (AS) aluminum gallium arsenide
(AlGaAs) red LED chip in a light red epoxy package. This
combination produces outstanding light output over a
wide range of drive currents.
• Long life: solid state reliability
The HLMP-0301 has a high efficiency red GaAsP on
GaP LED chip in a light red epoxy package.
The HLMP-0401 provides a yellow GaAsP on GaP LED chip
in a yellow epoxy package.
• Flat high sterance emitting surface
• Stackable on 2.54 mm (0.100 inch) centers
• Ideal as flush mounted panel indicators
• Ideal for backlighting legends
• Choice of 4 bright colors
– DH AS AlGaAs Red
– High Efficiency Red
– Yellow
– High Performance Green
• IC compatible/low current requirements
The HLMP-0504 provides a green GaP LED chip in a green
epoxy package.
Package Dimensions
7.62 (0.300)
7.11 (0.280)
7.62 (0.300)
6.99 (0.275)
0.46 (0.018)
SQ. NOMINAL
2.54 (0.100)
NOMINAL
CATHODE LEAD
29.21 (1.15) MIN.
8.00 (0.315)
7.37 (0.290)
2.54 (0.100)
2.16 (0.085)
1.27 (0.50)
NOMINAL
2.54 (0.100)
2.29 (0.090)
SIDE VIEW
BOTTOM VIEW
NOTES:
1. ALL DIMENSIONS ARE IN
MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND
ABOUT 1 mm (0.040") DOWN THE LEADS.
3. THERE IS A MXIMUM 1 TAPER FROM
BASE TO THE TOP OF LAMP.