LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
KMM
LXS
Series
LXQ
Longer life
Longer life
●Longer
life from KMQ series
with ripple current : 2,000 to 3,000 hours at 105℃
●Non solvent resistant type
●RoHS Compliant
Long life snap-ins, 105℃
KMM
KMS
Downsized
●Endurance
Longer life
KMQ
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-25 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
160 to 450Vdc
±20% (M)
I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
160 to 400V 420 & 450V
Rated voltage (Vdc)
0.15
0.20
tan
δ(Max.)
160 to 400V 420 & 450V
Rated voltage (Vdc)
4
8
Z(-25℃)/Z(+20℃)
Dissipation Factor
(tan )
δ
Low Temperature
Characteristics
(Max. Impedance Ratio)
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
(at 20℃, 120Hz)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage)for 3,000 hours (2,000 hours forφ20×20L products) at 105℃.
Capacitance change
≦
±20% of the initial value
≦200% of the initial specified value
D.F. (tan )
δ
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦
±15% of the initial value
D.F. (tan )
δ
≦150% of the initial specified value
Leakage current
≦The initial specified value
Endurance
Shelf Life
◆DIMENSIONS [mm]
●Terminal
Code : VS (φ20 toφ35) : Standard
Sleeve (PET : Brown)
Sleeve (PET : Brown)
PC board pin-out
Negative mark
*
4.0±0.5
L±2
Negative mark
PC board pin-out
2-1.2×6
φD+1max.
φD+1max.
10
2-φ2
Vent
Code : LI (φ35)
4.2±0.5
●Terminal
Vent
5±0.5
L±2
4.5±1
14.2±1
*φD=35mm : 3.5±0.5mm
The standard design has no plastic disc.
◆PART NUMBERING SYSTEM
1
2
3
4
E K MM
5
6
7
8
9
10
VS N
11
12
13
14
M
15
16
17
18
S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 120µF:121, 1,000µF:102)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161, 250V:251, 315V:3B1)
Series code
Category
Please refer to "Product code guide (snap-in type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/5)
CAT. No. E1001M
