Ecliptek | EQRM13 Series Oscillator
1 of 13
http://www.ecliptek.com/oscillators/EQRM13/
Log On
Home
Products
Quick Quote
My Parts List
Site Map
| 714-433-1200 |
Email Customer Support
Contact Us
EQRM13 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVPECL (PECL) 3.3Vdc 6 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
2011/65 +
2015/863
168 SVHC
Revision B 01/28/2015
Electrical Specifications
Nominal Frequency
10.000MHz to 625.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability
Inclusive of all conditions: Calibration Tolerance (at 25°C), Frequency
Stability over the Operating Temperature Range, Supply Voltage
Change and Output Load Change
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Operating Temperature Range
0°C to +70°C
-20°C to +70°C
-40°C to +85°C
-40°C to +105°C
-40°C to +125°C
Aging at 25°C
±2ppm Maximum First Year, ±10ppm/10 Years Maximum
Supply Voltage
3.3VDC ±5%
Input Current
75mA Maximum
Output Voltage Logic High (VOH)
VDD-1.025VDC Minimum, 2.4VDC Typical, Vdd-0.6VDC Maximum
Output Voltage Logic Low (VOL)
VDD-1.85VDC Minimum, 1.6VDC Typical, Vdd-1.62VDC Maximum
Duty Cycle
Measured at 50% of waveform
50 ±10(%)
50 ±5(%)
Rise Time/Fall Time
Measured at 20% to 80% of waveform
300pSec Maximum
Load Drive Capability
50 Ohms into VDD-2VDC
Output Logic Type
LVPECL
Phase Noise
Click to Open Phase Noise Table
Output Control Function
Output Enable (OE)
Output Control Input Voltage Logic High
(Vih)
90% of VDD Minimum or No Connect to Enable Output and
Complementary Output
Output Control Input Voltage Logic Low
(Vil)
10% of VDD Maximum to Disable Output and Complementary Output
(High Impedance)
Output Enable Time
100nSec Maximum
Output Disable Time
50nSec Maximum
28-Jan-2016 2:27 PM