VDE
TURQUOISE
SWITCHES
ABS TYPE
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
19.3
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
6.4
11.1
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
ORDERING INFORMATION
Ex. ABS
Type of
switch
Wire and
terminal
position
1
Terminal
ABS:
1: Straight type 1: .110 quick-connect
Turquoise 4: Right angle
terminal
switch
5: Left angle
4: Solder terminal
S type
5: PC board terminal
6: Wire leads
Remarks: 1.
2.
3.
4.
1
1
0
4
0
Operating
force by
Contact*
Agency standard
pin plunger
(max.)
1: SPDT
0: Pin plunger
4: 0.98 N
0: AgNi alloy
3: UL/CSA/SEMKO
2: SPST-NC 1: Short hinge lever 5: 1.47 N
1: Au-clad
(AgNi alloy contact,
3: SPST-NO 2: Hinge lever
triple layer
Au-clad triple layer type)
3: Long hinge lever
4: Au-clad
8: VDE/SEMKO
4: Simulated roller
double layer
(AgNi alloy contact,
lever
Au-clad triple layer type)
6: Roller lever
9: UL/CSA
8: Leaf lever
(Au-clad double layer type)
Contact
arrangement
Actuator
Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
SPST-NC and SPST-NO are only available for wire leads type.
Leaf lever is only available for wire leads type
As for wire position:
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
0: AgNi alloy
1: Au-clad triple layer
AgNi alloy
Au-clad
CuNi alloy
AgNi alloy
4: Au-clad double layer
Au-clad
CuNi alloy
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
