MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
LXY
High reliability, Low impedance, 105℃
LXZ
Series
Lower Z
Downsized
●Adoption
of innovative electrolyte and new technologies
●Endurance with ripple current : 2,000 to 8,000 hours at 105℃
●Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
LXY
Lower Z
LXV
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-55 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
10 to 63Vdc
±20% (M)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
10V 16V 25V 35V 50V 63V
Rated voltage (Vdc)
0.19 0.16 0.14 0.12 0.10 0.10
tan (Max.)
δ
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
10Vdc to 50Vdc : 3max.
Z(-55℃)/Z(+20℃)
63Vdc : 6max.
Dissipation Factor
(tan )
δ
Low Temperature
Characteristics
(Max. Impedance Ratio)
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
5
8
φ & 6.3 : 2,000hours φ : 3,000hours φ10 : 5,000hours φ12.5 : 7,000hours φ16 & 18 : 8,000hours
Time
Capacitance change
≦±20% of the initial value
D.F. (tan )
≦200% of the initial specified value
δ
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
≦±20% of the initial value
Capacitance change
D.F. (tan )
≦200% of the initial specified value
δ
≦The initial specified value
Leakage current
Endurance
Shelf Life
◆DIMENSIONS [mm]
φD'
φd
Sleeve (PET : Dark blue)
F±0.5
Code : E
F±0.5
● Terminal
L'
15min.
4min.
( 5 to φ )
10
φ
(φ
12.5 to φ )
16
φD
φd
F
D'
φ
L'
5
0.5
2.0
6.3
0.5
2.5
10 12.5
8
0.6 0.6 0.6
3.5 5.0 5.0
φD+0.5max.
L+1.5max.
16
0.8
7.5
Gas escape end seal
Vent
(Except φ5 & φ6.3)
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E L XY AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 120µF:121, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 10V:100, 25V:250, 63V:630)
Series code
Category
Please refer to "Product code guide (radial lead type)"
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency
Capacitance (µF)
Multipliers
Frequency (Hz)
10 to 180
220 to 560
680 to 1,800
2,200 to 3,900
4,700 to 8,200
120
0.40
0.50
0.60
0.75
0.85
1k
0.75
0.85
0.87
0.90
0.95
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
The endurance of capacitors is reduced with internal heating produced by ripple
current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to
be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/2)
CAT. No. E1001M
