LM6171
High Speed Low Power Low Distortion Voltage Feedback
Amplifier
General Description
Features
The LM6171 is a high speed unity-gain stable voltage feedback amplifier. It offers a high slew rate of 3600V/µs and a
unity-gain bandwidth of 100 MHz while consuming only 2.5
mA of supply current. The LM6171 has very impressive AC
and DC performance which is a great benefit for high speed
signal processing and video applications.
The ± 15V power supplies allow for large signal swings and
give greater dynamic range and signal-to-noise ratio. The
LM6171 has high output current drive, low SFDR and THD,
ideal for ADC/DAC systems. The LM6171 is specified for
± 5V operation for portable applications.
The LM6171 is built on National’s advanced VIP™ III (Vertically Integrated PNP) complementary bipolar process.
(Typical Unless Otherwise Noted)
n Easy-To-Use Voltage Feedback Topology
n Very High Slew Rate: 3600V/µs
n Wide Unity-Gain-Bandwidth Product: 100 MHz
n −3dB Frequency @ AV = +2: 62 MHz
n Low Supply Current: 2.5 mA
n High CMRR: 110 dB
n High Open Loop Gain: 90 dB
n Specified for ± 15V and ± 5V Operation
Applications
n
n
n
n
n
n
n
n
n
Multimedia Broadcast Systems
Line Drivers, Switchers
Video Amplifiers
NTSC, PAL ® and SECAM Systems
ADC/DAC Buffers
HDTV Amplifiers
Pulse Amplifiers and Peak Detectors
Instrumentation Amplifier
Active Filters
Typical Performance Characteristics
Closed Loop Frequency Responsevs. Supply Voltage
(AV = +1)
Large Signal Pulse Response
AV = +1, VS = ± 15
01233609
01233605
VIP™ is a trademark of National Semiconductor Corporation.
PAL ® is a registered trademark of and used under licence from Advanced Micro Devices, Inc.
© 2003 National Semiconductor Corporation
DS012336
www.national.com
LM6171 High Speed Low Power Low Distortion Voltage Feedback Amplifier
February 2003