LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
KMQ
Series
Downsized snap-ins, 105℃
KMR
●Endurance
with ripple current : 2,000 hours at 105℃
●Non solvent resistant type
●RoHS Compliant
Downsized
KMQ
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105℃ (35&50Vdc), -25 to +105℃ (160 to 450Vdc)
35&50Vdc, 160 to 450Vdc
±20% (M)
(at 20℃, 120Hz)
I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 5 minutes)
35V
50V
Rated voltage (Vdc)
160 to 250V 315 to 400V 420 & 450V
Nominal capacitance (µF) 10,000>C C≧10,000 10,000>C C≧10,000
0.30
0.35
0.25
0.30
(at 20℃, 120Hz)
tanδ(Max.)
0.15
0.15
0.20
Rated voltage (Vdc)
35&50V
160 to 250V 315 to 450V
Z(-25℃)/Z(+20℃)
4
4
8
(at 120Hz)
Z(-40℃)/Z(+20℃)
10
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
≦The initial specified value
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±15% of the initial value
D.F. (tanδ)
≦150% of the initial specified value
Leakage current
≦The initial specified value
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan )
δ
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
◆DIMENSIONS [mm]
Code : VS (
φ22 to φ35) : Standard
Sleeve (PET : Brown)
●Terminal
Vent
Negative mark
PC board pin-out
2-1.2×
6
D+1max.
φ
φD+1max.
10
2-φ2
4.0±0.5
L±2
Code : LI (φ35)
Sleeve (PET : Brown)
PC board pin-out
Negative mark
4.2±0.5
●Terminal
Vent
5±0.5
L±2
4.5±1
14.2±1
The standard design has no plastic disc.
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E KMQ A A A V S N A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 68µF:680, 3,300µF:332)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161, 315V:3B1, 450V:451)
Series code
Category
Please refer to "Product code guide (snap-in type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/4)
CAT. No. E1001M