CMF Industrial
Vishay Dale
Metal Film Resistors, Industrial, Precision
FEATURES
•
•
•
•
•
•
•
•
Small size - conformal coated
Flame retardant epoxy coating
Pb-free
Available
Controlled temperature coefficient
Excellent high frequency characteristics
e3
Exceptionally low noise; typically 0.10 µV/V
Low voltage coefficient to ± 5 ppm/V
RoHS*
Lead (Pb)-free version is RoHS compliant
COMPLIANT
Special tolerance and or TC matching available
on request
Vishay Dale Model CMF is also available as Military Qualified Styles RN and RL. See appropriate catalog or web page for the
MIL-SPEC ratings/attributes. (Except for marking, the Industrial and Military versions are exactly the same. Depending upon
stock, military marked parts may be supplied as industrial rated parts).
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RANGE Ω
LIMITING
GLOBAL HISTORICAL ELEMENT 0.1 % - 1 % 0.1 % - 0.5 % 1 % - 5 %
1%
2 %, 5 %
1%
MODEL
MODEL
VOLTAGE
25 ppm
50 ppm
50 ppm 100 ppm 100 ppm 150 ppm
MAX V≅
150 ppm
200 ppm
200 ppm
CMF50
CMF55
CMF60
CMF65
CMF70
CMF07
CMF20
10 - 22M
R5 - 50M
R5 - 10M
R5 - 22M
1 - 22M
1 - 5M
1 - 10M
10 - 22M
R5 - 50M
R5 - 10M
R5 - 22M
1 - 22M
-
10 - 22M
R1 - 50M
R1 - 10M
R1 - 22M
1 - 22M
1 - 5M
1 - 10M
CMF-50
CMF-55
CMF-60
CMF-65
CMF-70
CMF-07
CMF-20
200
250
500
500
500
250
500
10 - 2M5
10 - 2M5
10 - 2M5
10 - 2M5
10 - 2M5
-
10 - 2M5
10 - 2M5
10 - 2M5
10 - 2M5
10 - 2M5
-
10 - 2M5 10 - 2M5 10 - 2M5 10 - 22M
10 - 5M 1 - 22M1 1 - 22M1 R5 - 50M
10 - 10M 1 - 10M 1 - 10M R5 - 10M
10 - 10M 1 - 15M 1 - 15M R5 - 22M
10 - 10M 1 - 15M 1 - 15M 1 - 22M
5 - 5M
5 - 10M
-
2 %, 5 %
1%
2 %, 5 %
COMMERCIAL POWER RATING (see Performance Table)
WATTAGE
0.05
0.10
0.125
0.25
0.50
0.75
1.0
AT + 70 °C
CMF50
CMF50, CMF55
CMF50, CMF55, CMF60
CMF50, CMF55, CMF60, CMF65, CMF70, CMF07
CMF55, CMF60, CMF65, CMF70, CMF20
CMF60, CMF65, CMF70, CMF20
CMF60, CMF65, CMF70, CMF20
AT + 125 °C
CMF50
CMF50, CMF55
CMF50, CMF55, CMF60, CMF20
CMF55, CMF60, CMF65, CMF70, CMF20
CMF60, CMF65, CMF70, CMF20
CMF65, CMF70
-
Note
The above table summarizes the more common combinations of power rating, case size and ambient operating temperature that prevail in
various Industrial and Military resistor specifications. The “performance” table in ensuing pages qualifies the load life stability under these
combinations.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CMF55301R00FKRE (preferred part numbering format)
C
M
F
5
5
GLOBAL MODEL
RESISTANCE VALUE
(see Standard
Electrical
Specifications
table)
R = Decimal
K = Thousand
M = Million
R10000 = 0.1 Ω
680K00 = 680 kΩ
1M0000 = 1.0 MΩ
3
0
1
TOLERANCE
CODE
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F=±1%
G=±2%
J=±5%
R
0
0
TEMPERATURE
COEFFICIENT (1)
E = 25 ppm
H = 50 ppm
K = 100 ppm
L = 150 ppm
N = 200 ppm
F
K
R
E
SPECIAL
PACKAGING
EK = Lead (Pb)-free, Bulk
Blank = Standard
(Dash Number)
EA = Lead (Pb)-free, T/R (Full)
EB = Lead (Pb)-free,
(up to 3 digits)
T/R (1000 pieces)
From 1 - 999
as applicable
BF = Tin/Lead, Bulk
RE = Tin/Lead, T/R (Full)
R6 = Tin/Lead, T/R (1000 pieces)
Historical Part Number example: CMF-553010FT-1 (will continue to be accepted)
CMF-55
3010
F
T-1
R36
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
TEMP. COEFFICIENT
PACKAGING
Note
(1) Tolerances of ± 0.5 % (D), ± 0.25 % (C) and ± 0.1 % (B) are available only in 50 ppm and 25 ppm temperature coefficients
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
18
For technical questions, contact: ff2bresistors@vishay.com
Document Number: 31018
Revision: 14-Oct-08
CMF Industrial
Metal Film Resistors, Industrial, Precision
Vishay Dale
The increase in resistor surface temperature due to the rated load is
shown below.
Resistor surface temperature = heat rise plus ambient temperature.
120
100
HEAT RISE (° C)
RATED POWER IN %
CMF resistors have an operating temperature range of - 55 °C to
+ 175 °C. They must be derated at high ambient temperatures
according to the derating curve.
100
80
60
40
3/4 W
20
0
0
0
25
50
70 75 100
125
3/4 W
1/2 W
1/2 W
1/4 W
20
DERATING
1W
60
40
- 55 - 50 - 25
1W
80
1/8 W
1/10 W
1/2 W
1/4 W
1/8 W 1/4 W
CMF55 CMF60 CMF65
CMF07 CMF20 CMF70
150 165 175 200
HEAT RISE
AMBIENT TEMPERATURE IN °C
MATERIAL SPECIFICATIONS
Element:
Core:
Vacuum-deposited nickel-chrome alloy
Fire-cleaned high purity ceramic
SPECIAL MODIFICATIONS
Flame retardant epoxy, formulated for superior
moisture protection
Coating:
Continuous satisfactory coverage when tested in
accordance with MIL-R-10509
Solderability:
MARKING
1. Terminals may be supplied in any commercial material with
several type finishes.
2. Special pre-conditioning (power aging, temperature cycling, etc.)
to customer specifications.
- Value
- Decade and Tolerance
- Date code
3. Non-helixed resistors can be supplied for critical high frequency
applications.
(Alternately, parts may be MIL marked)
4. Fusible, flameproof versions available.
Note
• CMF07 and CMF20 parts are marked with color bands, either per
MIL-PRF-22684 (with a wide white band) or using commercial
color bands.
www.vishay.com
20
For technical questions, contact: ff2bresistors@vishay.com
Document Number: 31018
Revision: 14-Oct-08