L6258E
PWM controlled
high current DMOS universal motor driver
Not recommended for new design
Features
■
Able to drive both windings of a bipolar stepper
motor or two DC motors
■
Output current up to 1.2A each winding
■
Wide voltage range: 12V to 40V
■
Four quadrant current control, ideal for
microstepping and DC motor control
■
Precision PWM control
■
No need for recirculation diodes
■
TTL/CMOS compatible inputs
■
Cross conduction protection
■
Thermal shutdow
PowerSO36
Description
L6258E is a dual full bridge for motor control
applications realized in BCD technology, with the
capability of driving both windings of a bipolar
stepper motor or bidirectionally control two DC
motors.
The power stage is a dual DMOS full bridge
capable of sustaining up to 40V, and includes the
diodes for current recirculation.The output current
capability is 1.2A per winding in continuous mode,
with peak start-up current up to 1.5A. A thermal
protection circuitry disables the outputs if the chip
temperature exceeds the safe limits.
L6258E and a few external components form a
complete control and drive circuit. It has high
efficiency phase shift chopping that allows a very
low current ripple at the lowest current control
levels, and makes this device ideal for steppers as
well as for DC motors.
Table 1.
Device summary
Order code
Package
Packing
L6258E
(Replaced by E-L6258EX and EL6258EXTR)
PowerSO36
Tube
March 2010
Doc ID 8688 Rev 9
This is information on a product still in production but not recommended for new designs.
1/31
www.st.com
1
