Document 100-1
Chip Inductors – 0805CS (2012)
• Exceptional Q values, even at high frequencies
• Tight tolerances – 2% for most; 1% for some values
Part number1
0805CS-020XJE_
0805CS-3N0XJE_
0805CS-030XJE_
0805CS-050XJE_
0805CS-060XJE_
0805CS-070XJE_
0805CS-080X_E_
0805CS-100X_E_
0805CS-120X_E_
0805CS-150X_E_
0805CS-180X_E_
0805CS-220X_E_
0805CS-240X_E_
0805CS-270X_E_
0805CS-330X_E_
0805CS-360X_E_
0805CS-390X_E_
0805CS-430X_E_
0805CS-470X_E_
0805CS-560X_E_
0805CS-680X_E_
0805CS-820X_E_
0805CS-910X_E_
0805CS-101X_E_
0805CS-111X_E_
0805CS-121X_E_
0805CS-151X_E_
0805CS-181X_E_
0805CS-221X_E_
0805CS-241X_E_
0805CS-271X_E_
0805CS-331X_E_
0805CS-391X_E_
0805CS-471X_E_
0805CS-561X_E_
0805CS-681X_E_
0805CS-821X_E_
Inductance2
(nH)
2.8 @ 250 MHz
3.0 @ 250 MHz
3.3 @ 250 MHz
5.6 @ 250 MHz
6.8 @ 250 MHz
7.5 @ 250 MHz
8.2 @ 250 MHz
10 @ 250 MHz
12 @ 250 MHz
15 @ 250 MHz
18 @ 250 MHz
22 @ 250 MHz
24 @ 250 MHz
27 @ 250 MHz
33 @ 250 MHz
36 @ 250 MHz
39 @ 250 MHz
43 @ 200 MHz
47 @ 200 MHz
56 @ 200 MHz
68 @ 200 MHz
82 @ 150 MHz
91 @ 150 MHz
100 @ 150 MHz
110 @ 150 MHz
120 @ 150 MHz
150 @ 100 MHz
180 @ 100 MHz
220 @ 100 MHz
240 @ 100 MHz
270 @ 100 MHz
330 @ 100 MHz
390 @ 100 MHz
470 @ 50 MHz
560 @ 25 MHz
680 @ 25 MHz
820 @ 25 MHz
• Wirewound construction provides the highest SRFs in 0805
size
SRF typ5
Percent
DCR max6 7
Irms
Color
(MHz) (Ohms) (mA) code8
tolerance3
Q min4
5
5
5
5
5
5
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
5,2
5,2,1
5,2,1
5,2,1
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
1. When ordering, specify tolerance, termination and packaging codes:
0805CS-821XGEC
Tolerance: F = 1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations.
L
= RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C machine-ready reel. EIA-481 embossed plastic
= 7″
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D
= 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
80 @ 1500 MHz
65 @ 1500 MHz
50 @ 1500 MHz
65 @ 1000 MHz
50 @ 1000 MHz
50 @ 1000 MHz
50 @ 1000 MHz
60 @ 500 MHz
50 @ 500 MHz
50 @ 500 MHz
50 @ 500 MHz
55 @ 500 MHz
50 @ 500 MHz
55 @ 500 MHz
60 @ 500 MHz
55 @ 500 MHz
60 @ 500 MHz
60 @ 500 MHz
60 @ 500 MHz
60 @ 500 MHz
60 @ 500 MHz
65 @ 500 MHz
65 @ 500 MHz
65 @ 500 MHz
50 @ 250 MHz
50 @ 250 MHz
50 @ 250 MHz
50 @ 250 MHz
50 @ 250 MHz
44 @ 250 MHz
48 @ 250 MHz
48 @ 250 MHz
48 @ 250 MHz
33 @ 100 MHz
23 @ 50 MHz
23 @ 50 MHz
23 @ 50 MHz
12200
12200
12200
5900
5600
4800
4400
4300
4000
3200
3100
2600
2400
2580
2150
1900
2000
1800
1700
1600
1500
1330
1330
1250
1100
1100
920
920
820
770
730
650
600
375
330
310
310
0.06
0.06
0.08
0.08
0.11
0.14
0.12
0.10
0.15
0.17
0.20
0.22
0.22
0.25
0.27
0.27
0.29
0.34
0.31
0.34
0.38
0.42
0.48
0.46
0.48
0.51
0.56
0.64
0.70
1.00
1.00
1.40
1.50
1.76
1.90
2.20
2.35
800
800
600
600
600
600
600
600
600
600
600
500
500
500
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
350
350
310
290
250
230
190
180
Gray
White
Black
Orange
Brown
Green
Red
Blue
Orange
Yellow
Green
Blue
Gray
Violet
Gray
Orange
White
Yellow
Black
Brown
Red
Orange
Black
Yellow
Brown
Green
Blue
Violet
Gray
Red
White
Black
Brown
Violet
Orange
Green
Blue
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD‑D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
8. Each part is marked with a single dot. The color dots are not unique
identifiers and correspond to multiple inductance values.
9. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 100-1 Revised 06/11/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
