GS1535 HD-LINX II™
Multi-Rate SDI
Automatic Reclocker
GS1535 Data Sheet
Key Features
Description
•
SMPTE 292M, 259M and 344M compliant
•
Supports data rates of 143, 177, 270, 360, 540,
1483.5, 1485 Mb/s
•
Supports DVB-ASI at 270Mb/s
•
Auto and Manual Modes for rate selection
The GS1535 Multi-Rate Serial Digital Reclocker is
designed to automatically recover the embedded clock
signal and re-time the data from a SMPTE 292M,
SMPTE 259M or SMPTE 344M compliant digital video
signal.
•
Standards indication in Auto Mode
•
4:1 input multiplexor
•
Lock Detect Output
•
On-chip Input and Output Termination
•
Differential inputs and outputs
•
Configuarble automatic Mute or Bypass when not
locked
•
Manual Bypass function
•
SD/HD indication output to control GS1528 Dual
Slew-Rate Cable Driver
•
Pb-free and Green
•
Single 3.3V power supply
•
Operating temperature range: 0°C to 70°C
The device removes the high frequency jitter
components from the bit-serial stream. Input
termination is on-chip for seamless matching to 50Ω
transmission lines. An LVPECL compliant output
interfaces seamlessly to the GS1528 Cable Driver
The GS1535 can operate in either auto or manual rate
selection mode. In Auto mode the GS1535
automatically detects and locks onto an incoming
SMPTE SDI data signal from 143 Mb/s to 1.485 Gb/s.
For single rate data systems, the GS1535 can be
configured to operate in manual mode. In both modes,
the GS1535 requires only one external crystal to set the
VCO frequency when not locked and provides
adjustment free operation. In systems which require
passing non-SMPTE data rates, the GS1535 will
automatically or manually enter a bypass mode in order
to pass the signal without reclocking.
Applications
•
SMPTE 292M, SMPTE 259M and SMPTE 344M
Serial Digital Interfaces
XTAL+ XTAL-
XTAL XTAL
OUT+ OUT-
XTAL
OSC
LF+ LF-
The ASI/177 input pin allows for manual selection of
support of either 177Mb/s or DVB-ASI inputs.
KBB
BUFFER
RE-TIMER
M
U
X
DATA BUFFER
DDO/DDO
DDO_MUTE
DDI 0
DDI 1
DDI 2
DDI 3
PHASE
FREQUENCY
DETECTOR
D
A
T
A
M
U
X
CHARGE
PUMP
VCO
PHASE
DETECTOR
M
U
X
DIVIDE BY
2,4,6,8,12,16
DIVIDE BY
152, 160, 208
BYPASS
LOGIC
CONTROL LOGIC
DDI_SEL[1:0]
SS[2:0]
ASI/177
AUTO/MAN
LD
AUTOBYPASS
BYPASS
GS1535 Functional Block Diagram
18557 - 8
February 2005
1 of 22
www.gennum.com