CC-E Series
Ultra Compact, 1.5W to 25W Single and Dual DC-DC Converters
Compact Footprint / Low Profile
Through Hole or SMT Versions
5V, 12V, 24V & 48V Inputs
3.3 to 30V1 Single, ±12 to 15V Dual Outputs
Output Voltage Adjustment
Input - Output Isolation
RoHS Compliant
5 Year Warranty
Key Market Segments & Applications
Telecommunications
Instrumentation
Features & Benefits
Feature
Datacom
Benefit
Compact
Self contained
Multiple Input Voltage configurations
Open frame (no potting)
Less pcb area used
Requires no external components
Easier system configuration
Lighter in weight, suitable for surface mount (R version)
Specifications
Nominal Output Voltage
DC Input
Efficiency
Output Voltage Tolerance
Output Adjustment (via trim pin)
Line Regulation
Load Regulation
Temperature Coefficient
Preload
Output Ripple (typ./max.BW 50MHz)
Overcurrent Protection
Overvoltage Protection
Remote On/ Off
V
V
%
%
V
mV
mV
%
mV
-
Operating Temp.- Convection
Operating Temp.- Forced Air
Storage Temperature
Humidity (non Condensing)
Isolation Voltage
Isolation Resistance
Shock
Vibration (non Operating)
Safety Agency Approvals
Weight
Size (L x W x H)
(DIP Through Hole and SMD package)
(SIP Through Hole only)
Warranty
°C
°C
°C
m/s2
g
in
1.
2.
-
3.3V
5V
12/15V
±12/15 (24/30)1
5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V
71 to 90% model dependant
1.5-10W: ±3%, 15-25W: ±5%
±5%
3.15-3.6V
4.75-6.0V
11.4-15V
22.8 - 30V
20 (40 CC15; 30 CC25)
40
80
40 (120 CC15; 200 CC25)
100
6002
<± 0.02%/°C
No preload required
40/120
30/120
Output current limiting with automatic recovery, shutdown CC15, 25 type
No
CC1R5, 3, 6, & 10: RC terminal open, output is OFF; RC terminal to -Vin (0-0.4V), output is ON
CC15 & CC25: RC terminal open, output is ON; RC terminal to +Vin, output is OFF
-40 to 85°C, derates linearly to 40% load from 50°C to 85°C
-40°C to 85°C with 1m/s air full load
-40°C to 85°C
95% RH max.(maximum wet-bulb temperature: 38°C)
500VAC 1 min. Input to output, input to case, output to case
Input to output, input to case, output to case: 50M ohm min. (500VDC)
980m/s2 (100G) 6ms (6 directions, each 3 times)
10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours
UL60950-1, CSA60950-1, EN60950-1, CE Mark
CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0, CC15: 12.5, CC25: 20.0
CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335
CC10: 1.400 x 0.890 x 0.335; CC15: 1.500 x 1.264 x 0.295; CC25: 1.701 x 1.768 x 0.295
CC3 (SIP): 1.09 x 0.362 x 0.705
5 years
For 24V/30V output - connnect across +Vout & -Vout and leave "common
out" pin not connected
Based upon equal load current from both outputs
3.
4.
For 15V output connect trim to -Vout
See Installation Manual for full specifications, test methods of parameters and
application notes
3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4
115
