MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
•
•
•
•
•
•
•
•
•
Specifications rated from 2.7V to 5.5V supplies
Rail-to-rail swing at output
Common-mode input swing below ground
2.8MHz GBWP
Unity gain stable
Low power IDD = 325µA max
Chip Select capability with MCP603
Industrial temperature range (-40°C to 85°C)
Available in single, dual and quad
APPLICATIONS
•
•
•
•
•
•
•
Portable Equipment
A/D Converter Driver
Photodiode Pre-amps
Analog Filters
Data Acquisition
Notebooks and PDAs
Sensor Interface
PACKAGES
MCP601
MCP602
PDIP, SOIC, TSSOP
PDIP, SOIC, TSSOP
8 NC
NC 1
8 VDD
OUTA 1
-IN 2
-
7 VDD
+IN 3
+
6 OUT
A
-INA 2
+INA 3
VSS 4
7 OUTB
- +
6 -INB
B
+ -
VSS 4
5 NC
5 +INB
MCP603
MCP604
PDIP, SOIC, TSSOP
PDIP, SOIC, TSSOP
NC 1
8 CS
OUTA 1
-IN 2
-
7 VDD
-INA 2
+IN 3
+
6 OUT
14 OUTD
-A+
D-
+
+INA 3
VSS 4
13 -IND
12 +IND
VDD 4
11 VSS
+INB 5
5 NC
10 +INC
-INB 6
-B+
+
C
-
OUTB 7
9 -INC
8 OUTC
AVAILABLE TOOLS
• Spice Macromodels (at www.microchip.com)
• FilterLab™ Software (at www.microchip.com)
TYPICAL APPLICATION
© 1999 Microchip Technology Inc.
DESCRIPTION
The Microchip Technology Inc. MCP601/602/603/604
family of low power operational amplifiers are offered in
single (MCP601), single with a Chip Select pin feature
(MCP603), dual (MCP602) and quad (MCP604) configurations. These operational amplifiers (op amps) utilize
an advanced CMOS technology, which provides low
bias current, high speed operation, high open-loop gain
and rail-to-rail output swing. This product offering operates with a single supply voltage that can be as low as
2.7V, while drawing less than 325µA of quiescent current. In addition, the common-mode input voltage
range goes 0.3V below ground, making these amplifiers ideal for single supply operation.
These devices are appropriate for low-power battery
operated circuits due to the low quiescent current, for
A/D Converter driver amplifiers because of their wide
bandwidth, or for anti-aliasing filters by virtue of their
low input bias current.
© 1999 Microchip Technology Inc.
VIN
-IN
VDD
MCP60X
+IN
VREF
VOUT
OUT
VSS
Rail-to-Rail
Output Swing
Low Input Bias
Current Over
Temperature
2nd Order Low Pass Filter
The MCP601, MCP602 and MCP603 are available in
standard 8-lead PDIP, SOIC and TSSOP packages.
The quad MCP604 is offered in 14-lead PDIP, SOIC
and TSSOP packages. PDIP and SOIC packages are
fully specified from -40°C to +85°C with power supplies
from 2.7V to 5.5V.
DS21314C-page 1