FT232BQ USB UART ( USB - Serial) I.C.
The FT232BQ is the 5 x5 mm lead free QFN32 package version of the 2nd generation of FTDI’s popular USB UART
I.C. This device not only adds extra functionality to its FT8U232AM predecessor and reduces external component
count, but also maintains a high degree of pin compatibility with the original, making it easy to upgrade or cost reduce
existing designs as well as increasing the potential for using the device in new application areas.
1.0
Features
HARDWARE FEATURES
•
Single Chip USB Asynchronous Serial Data
•
Transfer
Compact 5 x 5 mm Lead free RoHS compliant
QFN32 package.
•
Full Handshaking & Modem Interface Signals
VIRTUAL COM PORT (VCP) DRIVERS for
•
UART I/F Supports 7 / 8 Bit Data, 1 / 2 Stop Bits
-
Windows 98 and Windows 98 SE
and Odd/Even/Mark/Space/No Parity
-
Windows 2000 / ME / XP
•
Data rate 300 => 3M Baud (TTL)
-
Windows CE 4.2
•
Data rate 300 => 1M Baud (RS232)
-
MAC OS-8 and OS-9
•
Data rate 300 => 3M Baud (RS422/RS485)
-
MAC OS-X
•
384 Byte Receive Buffer / 128 Byte Transmit Buffer
-
Linux 2.40 and greater
for high data throughput
D2XX (USB Direct Drivers + DLL S/W Interface)
•
Adjustable RX buffer timeout
-
Windows 98 and Windows 98 SE
•
Fully Assisted Hardware or X-On / X-Off
-
Windows 2000 / ME / XP
Handshaking
-
Windows CE 4.2
In-built support for event characters and line break
-
Linux 2.40 and greater
condition
APPLICATION AREAS
•
Auto Transmit Buffer control for RS485
-
USB RS232 Converters
•
Support for USB Suspend / Resume through
-
USB RS422 / RS485 Converters
SLEEP# and RI# pins
-
Upgrading RS232 Legacy Peripherals to USB
Support for high power USB Bus powered devices
-
Cellular and Cordless Phone USB data transfer
•
•
through PWREN# pin
cables and interfaces
Integrated level converter on UART and control
-
Interfacing MCU based designs to USB
signals for interfacing to 5V and 3.3V logic
-
USB Audio and Low Bandwidth Video data transfer
•
Integrated 3.3V regulator for USB IO
-
PDA USB data transfer
•
Integrated Power-On-Reset circuit
-
USB Smart Card Readers
•
Integrated 6MHz – 48Mhz clock multiplier PLL
-
Set Top Box (S.T.B.) PC - USB interface
•
USB Bulk or Isochronous data transfer modes
-
USB Hardware Modems
•
4.35V to 5.25V single supply operation
-
USB Wireless Modems
•
UHCI / OHCI / EHCI host controller compatible
-
USB Instrumentation
•
USB 1.1 and USB 2.0 compatible
-
USB Bar Code Readers
•
USB VID, PID, Serial Number and Product
•
Description strings in external EEPROM
•
EEPROM programmable on-board via USB
DS232BQ Version 1.7
© Future Technology Devices Intl. Ltd. 2005
Page 1 of 25