DIR1703
SLES007– JULY 2001
DIGITAL AUDIO INTERFACE RECEIVER
FEATURES
D Standard Digital Audio Interface Receiver
D
D
D
D
D
D
D
D
D
DESCRIPTION
(EIAJ1201)
Sampling Rate: 32 / 44.1 / 48 / 88.2 / 96 kHz
Recover 128 / 256 / 384 / 512 fs System Clock
Very Low Jitter System Clock Output (75 ps
Typically)
On-Chip Master Clock Oscillator, Only an
External Crystal Is Required:
24.576 / 22.5792 / 18.432 / 16.9344 / 16.384 /
12.288 / 11.2896 / 8.192 / 6.144 / 5.6448 /
4.096 MHz Crystals Are Available
Selectable Output PCM Audio Data Format
Selectable Crystal Clock and PPL Clock
Operation Mode
Output User Bit Data, Flag Signals, and
Channel Status Data With Block Start Signal
Single 3.3-V Power Supply
Package: 28 SSOP
APPLICATIONS
D AV Receiver
D MD Player
D DAC Unit
The DIR1703 is a digital audio interface receiver
(DIR) which receives and decodes audio data up
to 96 kHz according to the AES/EBU, IEC958,
S/PDIF, and EIAJCP340/1201 consumer and
professional format interface standards. The
DIR1703 demultiplexes the channel status bit and
user bit directly to serial output pins, and has
dedicated output pins for the most important
channel status bits. It also includes extensive
errors reporting.
The significant advantages of the DIR1703 are
96-kHz sampling rate capability and Low-jitter
clock recovery by the Sampling Period Adaptive
Controlled Tracking (SpAct) system. The input
signal is reclocked with the patented Sampling
period Adaptive controlled tracking system for
maximum quality. These features are required for
recent consumer and professional audio
instruments, in which the DIR has an interface to
any kind of delta-sigma type ADC/DAC with a
96-kHz sampling rate.
This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SpAct and Burr-Brown are trademarks of Texas Instruments.
Copyright 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
1
