M25PX80
8-Mbit, dual I/O, 4-Kbyte subsector erase,
serial Flash memory with 75 MHz SPI bus interface
Features
SPI bus compatible serial interface
75 MHz (maximum) clock frequency
2.3 V to 3.6 V single supply voltage
Dual input/output instructions resulting in an
equivalent clock frequency of 150 MHz:
– Dual Output Fast Read instruction
– Dual Input Fast Program instruction
VFQFPN8 (MP)
6 × 5 mm
8 Mbit Flash memory
– Uniform 4-Kbyte subsectors
– Uniform 64-Kbyte sectors
SO8W (MW)
208 mils
Additional 64-byte user-lockable, one-time
programmable (OTP) area
Erase capability
– Subsector (4-Kbyte) granularity
– Sector (64-Kbyte) granularity
– Bulk Erase (8 Mbit) in 8 s (typical)
Write protections
– Software write protection applicable to
every 64-Kbyte sector (volatile lock bit)
– Hardware write protection: protected area
size defined by three non-volatile bits (BP0,
BP1 and BP2)
SO8N (MN)
150 mils
Deep Power-down mode: 5 μA (typical)
Electronic signature
– JEDEC standard two-byte signature
(7114h)
– Unique ID code (UID) with16 bytes readonly, available upon customer request
PDIP8 (BA)
300 mils width
More than 100 000 write cycles per sector
More than 20 year data retention
Packages
– RoHS compliant
December 2008
Rev 4
1/60
www.Numonyx.com
1