TA84007PQ/SG/FG
Preliminary
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA84007PQ,TA84007SG,TA84007FG
DC Motor Full Bridge Driver ICs (Forward/reverse switching driver ICs)
The TA84007PQ, TA84007SG and TA84007FG are bridge driver
ICs designed for forward/reverse rotation switching and that are
capable of four modes of control (forward, reverse, stop and
brake).
The TA84007PQ has an output current of 1.0 A (AVE.) and 2.0 A
(PEAK) and the TA84007SG and TA84007FG have an output
current of 0.4 A (AVE.) and 1.2 A (PEAK).
These driver ICs are equipped with a dual power supply pin on
the output and control sides and a Vref pin on the output side
capable of controlling motor voltage making it possible to adjust
the voltage applied to the motor. Additionally, these driver ICs
have a low input current and can connect directly to the CMOS.
TA84007PQ
TA84007SG
Features
•
Operation power supply voltage range:
VCC (opr.) = 4.5 to 27 V
VS (opr.) = 4.5 to 27 V
Vref (opr.) = 4.5 to 27 V
Usage Note:
Design your application so that Vref ≤ VS
•
Output current: PQ: 1.0 A (AVE.), 2.0 A (PEAK)
SG and FG: 0.4 A (AVE.), 1.2 A (PEAK)
•
Built-in thermal shutdown and overcurrent protection
•
Built-in back EMF suppression diode
•
Built-in input hysteresis
•
Built-in standby
Note: These ICs are highly sensitive to electrostatic discharge.
When handling them, please be careful of electrostatic
discharge, temperature and humidity conditions.
TA84007FG
Weight
HSIP10-P-2.54: 2.47 g (typ.)
SOIP9-P-2.54A: 0.92 g (typ.)
HSOP16-P-300-1.00: 0.50 g (typ.)
The following conditions apply to solderability:
*Solderability
1. Use of Sn-37Pb solder bath
*solder bath temperature = 230ºC
*dipping time = 5 seconds
*number of times = once
*use of R-type flux
2. Use of Sn-3.0Ag-0.5Cu solder bath
*solder bath temperature = 245ºC
*dipping time = 5 seconds
*number of times = once
*use of R-type flux
1
2006-3-6
