JWPF CONNECTOR
2.0mm pitch/Disconnectable Crimp style Wire-to-wire connectors
Specifications –––––––––––––––––––
• Current rating: 3 A AC, DC (AWG #22)
• Voltage rating: 100 V AC, DC
• Temperature range: -55˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10 mΩ max.
After environmental tests/ 15 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 1,000 VAC/minute
• Applicable wire: AWG #26 to #22
0.13 to 0.33 mm2
Insulation O.D./ 1.4 to 1.7 mm
• Waterproof grade: Grade 7 ingress protection of JIS C 0920
(IPX7 of IEC 60529 )
This JWPF connector can be used for the
place of which especially waterproof is
required.
This is the wire-to-wire connector that is
grade 7 ingress protection of JIS C 0920
(IPX7 of IEC 60529).
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
* Compliant with RoHS.
• Waterproof performance
• Contained seal ring
• Solid rubber seal
• Double-spring construction
• Housing-to-terminal locks
• Inner-housing lock
Standards ––––––––––––––––––––––
0
Recognized E60389
30.2
4
4
JST
Contact
Applicable wire
Model No.
Receptacle
contact
Tab contact
AWG #
mm2
Tab contact
Insulation
O.D.
(mm)
Q’ty /
reel
26∼22
1.4∼1.7
8,200
SWPT-001T-P025 SWPR-001T-P025 0.13∼0.33
15.2
4.5
2
Material and Finish
7.5
Tab contact: Phosphor bronze, tin-plated (reflow treatment)
Receptacle contact: Copper alloy, tin-plated (reflow treatment)
RoHS compliance
Note: Contact JST for brass products.
Receptacle contact
Contact
SWPT-001T-P025
SWPR-001T-P025
11.7
6
1
4.5
Crimping
machine Crimp applicator
AP-K2N
MKS-L
−
Applicator
Dies
Crimp applicator with dies
MK/SWPR/T-001-025 APLMK SWPR/T001-025
−
−