PCI1510 GGU/GVF
PGE/ZGU/ZVF
www.ti.com
SLLA229 – JUNE 2006
PC Card Controllers
FEATURES
•
•
•
•
•
•
•
•
A 144-terminal low-profile QFP (PGE),
144-terminal MicroStar BGA™ ball-grid array
(GGU/ZGU) package, or a 209-terminal PBGA
(GVF/ZVF) package
2.5-V core logic and 3.3-V I/O with universal
PCI interfaces compatible with 3.3-V and 5-V
PCI signaling environments
Integrated low-dropout voltage regulator
(LDO-VR) eliminates the need for an external
2.5-V power supply
Mix-and-match 5-V/3.3-V 16-bit PC Cards and
3.3-V CardBus Cards
A single PC Card or CardBus slot with hot
insertion and removal
Parallel interface to TI TPS2211A single-slot
PC Card power switch
Burst transfers to maximize data throughput
with CardBus Cards
Interrupt configurations: parallel PCI,
serialized PCI, parallel ISA, and serialized ISA
•
•
•
•
•
•
•
•
•
•
•
•
Serial EEPROM interface for loading
subsystem ID, subsystem vendor ID, and
other configuration registers
Pipelined architecture for greater than
130-Mbps throughput from CardBus-to-PCI
and from PCI-to- CardBus
Up to five general-purpose I/Os
Programmable output select for CLKRUN
Five PCI memory windows and two I/O
windows available for the 16-bit interface
Two I/O windows and two memory windows
available to the CardBus socket
Exchangeable-card-architecture- (ExCA-)
compatible registers are mapped in memory
and I/O space
Intel™ 82365SL-DF and 82365SL register
compatible
Ring indicate, SUSPEND, PCI CLKRUN, and
CardBus CCLKRUN
Socket activity LED terminal
PCI bus lock (LOCK)
Internal ring oscillator
DESCRIPTION
The Texas Instruments PCI1510 device, a 144-terminal or a 209-terminal single-slot CardBus controller
designed to meet the PCI Bus Power Management Interface Specification for PCI to CardBus Bridges, is an
ultralow-power high-performance PCI-to-CardBus controller that supports a single PC card socket compliant with
the PC Card Standard (rev. 7.2). The controller provides features that make it the best choice for bridging
between PCI and PC Cards in both notebook and desktop computers. The PC Card Standard retains the 16-bit
PC Card specification defined in the PCI Local Bus Specification and defines the 32-bit PC Card, CardBus,
capable of full 32-bit data transfers at 33 MHz. The controller supports both 16-bit and CardBus PC Cards,
powered at 5 V or 3.3 V, as required.
The controller is compliant with the PCI Local Bus Specification, and its PCI interface can act as either a PCI
master device or a PCI slave device. The PCI bus mastering is initiated during CardBus PC Card bridging
transactions. The controller is also compliant with PCI Bus Power Management Interface Specification (rev. 1.1).
All card signals are internally buffered to allow hot insertion and removal without external buffering. The
controller is register-compatible with the Intel 82365SL-DF and 82365SL ExCA controllers. The controller
internal data path logic allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for
maximum performance. Independent buffering and a pipeline architecture provide an unsurpassed performance
level with sustained bursting. The controller can also be programmed to accept fast posted writes to improve
system-bus utilization.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MicroStar BGA is a trademark of Texas Instruments.
Intel is a trademark of Intel Corporation.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
